PEDAL 0845287 - Caterpillar

Removal Procedure
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Raise the engine enclosure.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g01128616
Remove nut (4) from ball joint (1) and disconnect rod (2) from the governor.
Disconnect harness assembly (5) .
Remove bolts (3) and remove throttle solenoid (6) from the bracket.Installation Procedure
Illustration 2 g01128616
Install throttle solenoid (6) on the bracket. Install bolts (3) .
Connect harness assembly (5) .
Connect rod (2) on the governor and install nut (4) on ball joint (1) .
Turn the battery disconnect switch to the ON position.
Close the engine enclosure.