1276793 PEDAL AS Caterpillar parts
307B, 311B, 312B, 312B L, 315B L, 317B LN, 318B, 320B, 320B L, 322B LN, 322C, 325B, 325B L, 330B L, 345B II, 345B L, 375
Rating:
Alternative (cross code) number:
CA1276793
127-6793
1276793
CA1276793
127-6793
1276793
Weight: 1 pounds 0 kg.
EXCAVATOR, MINI HYD EXCAVATOR,
Compatible equipment models: 1276793:
Information:
Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear and damage. Refer to Specifications, "Rocker Shaft" for more information. If necessary, replace any components that are worn or damaged.
Illustration 1 g03454396
If necessary, follow Step 2.a in order to install threaded inserts (1) to the rocker arms.
Loosely install threaded inserts (1) to rocker arm assembly (4) and rocker arm assembly (5). Note: The components must be reinstalled in the original location. Do not interchange components.
Lubricate the bore of rocker arm assemblies (4) for the inlet valve with clean engine oil.
Lubricate the bore of rocker arm assemblies (5) for the exhaust valve with clean engine oil.
Lubricate rocker shaft (6) with clean engine oil.
If necessary, install retaining clip (2) and spring (3) to the front end of rocker shaft (6).
Install rocker arm assembly (4) for number one inlet valve to the rocker shaft. Install rocker arm assembly (5) for number one exhaust valve to rocker shaft (6). Note: The rocker arm assembly for the inlet valve is longer than the rocker arm assembly for the exhaust valve. Used components should be installed in the original location.
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install retaining clip (7) to rocker shaft (6).
Install spring (8) to rocker shaft (6).
Install rocker arm assembly (4) for number two inlet valve to the rocker shaft. Install rocker arm assembly (5) for number two exhaust valve to rocker shaft (7). Note: The rocker arm assembly for the inlet valve is longer than the rocker arm assembly for the exhaust valve. Used components should be installed in the original location.
Repeat Step 8 through Step 10 in order to assemble the remaining components to rocker shaft (6). End By:
Install the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear and damage. Refer to Specifications, "Rocker Shaft" for more information. If necessary, replace any components that are worn or damaged.
Illustration 1 g03454396
If necessary, follow Step 2.a in order to install threaded inserts (1) to the rocker arms.
Loosely install threaded inserts (1) to rocker arm assembly (4) and rocker arm assembly (5). Note: The components must be reinstalled in the original location. Do not interchange components.
Lubricate the bore of rocker arm assemblies (4) for the inlet valve with clean engine oil.
Lubricate the bore of rocker arm assemblies (5) for the exhaust valve with clean engine oil.
Lubricate rocker shaft (6) with clean engine oil.
If necessary, install retaining clip (2) and spring (3) to the front end of rocker shaft (6).
Install rocker arm assembly (4) for number one inlet valve to the rocker shaft. Install rocker arm assembly (5) for number one exhaust valve to rocker shaft (6). Note: The rocker arm assembly for the inlet valve is longer than the rocker arm assembly for the exhaust valve. Used components should be installed in the original location.
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install retaining clip (7) to rocker shaft (6).
Install spring (8) to rocker shaft (6).
Install rocker arm assembly (4) for number two inlet valve to the rocker shaft. Install rocker arm assembly (5) for number two exhaust valve to rocker shaft (7). Note: The rocker arm assembly for the inlet valve is longer than the rocker arm assembly for the exhaust valve. Used components should be installed in the original location.
Repeat Step 8 through Step 10 in order to assemble the remaining components to rocker shaft (6). End By:
Install the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install" for the correct procedure.
Caterpillar parts catalog:
Parts pedal Caterpillar catalog:
2278179
PEDAL
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D
1178700
PEDAL
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D
2231445
PEDAL
M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
1140832
PEDAL AS-RH
307, 312, 315, 317, 320 L, 330 L
307, 312, 315, 317, 320 L, 330 L
1140831
PEDAL AS-LH
307, 312, 315, 317, 320 L, 330 L
307, 312, 315, 317, 320 L, 330 L
6C9308
PEDAL-RUBBER-RH
307, 312, 315, 317, 320 L, 325 L, 330 L, 350, 350 L, 375, 5080
307, 312, 315, 317, 320 L, 325 L, 330 L, 350, 350 L, 375, 5080
1485182
PEDAL AS
301.5, 302.5, 303.5, 304.5
301.5, 302.5, 303.5, 304.5
1229609
PEDAL-RUBBER
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 312D, 312D L, ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 312D, 312D L, ...
1229608
PEDAL-RUBBER
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 312D, 312D L, ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 312D, 312D L, ...
1176349
PEDAL AS
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 312D, 312D L, ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 312D, 312D L, ...
1176350
PEDAL AS
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 312D, 312D L, ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 312D, 312D L, ...
1211865
PEDAL-RUBBER
307B, 307C, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 315B L, 315C, 315D L, 316E L, 317B LN, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320B L...
307B, 307C, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 315B L, 315C, 315D L, 316E L, 317B LN, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320B L...