PEDAL GP-GOVERNOR 3258383 - Caterpillar

Illustration 1 g00368853
Illustration 2 g00705953
Area AArea B (1) The bearing is installed from the edge of the housing by the following value. ... 4.8 0.5 mm (0.19 0.02 inch) (3) The bearing is installed from the edge of the housing by the following value. ... 1.0 0.5 mm (0.039 0.020 inch)For bearings (1), (2), and (3), the bearings' joint clearance must be within 30 1 degrees of the top center. Refer to (6) Illustration 2 for further information. The bearing oil hole must be within 30 1 degrees. Refer to (7) Illustration 2 for further information. (5) The distance from the bottom of the housing to the end of the dowel ... 1.5 0.3 mm (0.059 0.012 inch)