PEDAL AS 3560794 - Caterpillar

Removal Procedure
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly , "System Pressure - Release". Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Open the access panel that is located behind the cab.
Illustration 1 g01456822
The gear pump for the steering oil cooler is located on the end of the center pump group. Disconnect hose assemblies (1) that are located on the top and the bottom of gear pump (2). Remove bolts (3) and remove gear pump (2). The weight of gear pump (2) is approximately 15 kg (33 lb).