AVSPARE.COM
parts catalog

PEDAL AS 3727450 - Caterpillar



3727450 PEDAL AS Caterpillar parts 300.9D PEDAL
Rating:
52
Alternative (cross code) number:
CA3727450
372-7450
3727450
Caterpillar 3727450 PEDAL AS
Weight: 5 pounds 2 kg.

Buy PEDAL AS 3727450 Caterpillar genuine, new aftermarket tractor parts with delivery
MINI HYD EXCAVATOR,

Compatible equipment models: 3727450:

MINI HYD EXCAVATOR  300.9D   Caterpillar
Number on catalog scheme: 16
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     2P-8250     Strap Wrench Assembly     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00671271
Typical Example R. H. Engine
Illustration 2 g00671294
Typical ExampleL. H. Engine
Use Tool (A) to remove fuel filter (5) .
Disconnect the fuel temperature sensor connector.
Illustration 3 g00671364
Typical Example
Remove fuel temperature sensor (2) .
Remove O-ring seal (6) from fuel temperature sensor (2) .
Disconnect hose assemblies (1). Plug all openings immediately.
Remove two bolts (3) and the washers.
Remove fuel filter base (4) and the two O-ring seals.
Remove the fuel filter mounting stud from the fuel filter base, if necessary.Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     2P-8250     Strap Wrench Assembly     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Apply 9S-3263 Thread Lock Compound to the threads of the fuel filter mounting stud. Apply the compound to the tapered end of the stud no more than 7.6 mm (.30 inch) from the end.
Install the stud and tighten to a torque of 70 15 N m (52 11 lb ft).
Inspect the condition of the O-ring seals. Replace the seals, if necessary.
Illustration 4 g00671294
Typical ExampleL. H. Engine
Install the O-rings on fuel filter base (4) .
Install fuel filter base (4) with two bolts (3) and the washers.
Connect hose assemblies (1) .
Illustration 5 g00671364
Typical Example
Install the fuel temperature sensor (2) and connect the fuel temperature sensor connector.
Illustration 6 g00671271
Typical ExampleR. H. Engine
Use Tool (A) in order to install new fuel filter (5). Follow the instructions on the fuel filter.

Caterpillar parts catalog:

Caterpillar parts catalog
300.9D Mini Hydraulic Excavator DW200001-UP (MACHINE)
300.9D Mini Hydraulic Excavator LJM00001-UP (MACHINE)
300.9D Mini Hydraulic Excavator LJ200001-UP (MACHINE)


Parts pedal Caterpillar catalog:

3284956 PEDAL AS
312E, 314E CR, 314E LCR, 316E L, 320D, 320D L, 320D RR, 320E, 320E LN, 320E LRR, 320E RR, 323D L, 324D L, 324E, 329D, 329D L, 329E, 336D, 336D2, 336E, 345D L, 349D L, 349E, 390F L
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.