3757917 PEDAL GP-GOVERNOR & BRAKE Caterpillar parts
Rating:
Alternative (cross code) number:
CA3757917
375-7917
3757917
CA3757917
375-7917
3757917
Information:
Pressurized System
Illustration 13 g00102642
This warning label is positioned on the radiator.
g00102645
PRESSURIZED SYSTEM: HOT COOLANT CAN CAUSE SERIOUS BURN. TO OPEN CAP, STOP ENGINE, WAIT UNTIL RADIATOR IS COOL. THEN LOOSEN CAP SLOWLY TO RELIEVE THE PRESSURE.
Engine Start Switch Key
Illustration 14 g00110426
This warning label is positioned on the engine hood.
g00286940Before any maintenance is performed, shut off the engine and remove the engine start switch key.Changes to Machine Control Pattern
Illustration 15 g00102647
This illustration is a typical example. This warning label is positioned on the right side of the cab. This warning label is on machines that are equipped with two-way valves or four-way valves.
g00102648
WHENEVER A CHANGE IS MADE TO THE MACHINES CONTROL PATTERN ALSO EXCHANGE THE PATTERN CARD IN THE CAB TO MATCH THE NEW PATTERN. FOLLOW THE CORRECT PROCEDURE IN THE OPERATOR AND MAINTENANCE MANUAL.
Machine Control Pattern
Illustration 16 g00102650
This illustration is a typical example. This warning label is positioned in the cab.
g00102651
CHECK MACHINE CONTROL PATTERN FOR CONFORMANCE TO PATTERN ON CARD IN CAB. IF NOT, CHANGE CARD TO MATCH PATTERN BEFORE OPERATING MACHINE. FAILURE TO DO SO COULD RESULT IN INJURY.
Flying Debris
Illustration 17 g00362055
This warning label is positioned on the demolition tool.
g00362157Flying stones and debris may cause personal injury. Maintain a minimum distance of 10 m (33 ft).Do Not Operate (Demolition Tool)
Illustration 18 g00362517
This warning label is positioned on the demolition tool.
g00362519
Do not operate or work on this attachment unless you have read and understand the instructions and warnings in the Operation And Maintenance Manual for both the attachment and base machine.Failure to follow the instructions or heed the warnings could result in injury or death.Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Illustration 13 g00102642
This warning label is positioned on the radiator.
g00102645
PRESSURIZED SYSTEM: HOT COOLANT CAN CAUSE SERIOUS BURN. TO OPEN CAP, STOP ENGINE, WAIT UNTIL RADIATOR IS COOL. THEN LOOSEN CAP SLOWLY TO RELIEVE THE PRESSURE.
Engine Start Switch Key
Illustration 14 g00110426
This warning label is positioned on the engine hood.
g00286940Before any maintenance is performed, shut off the engine and remove the engine start switch key.Changes to Machine Control Pattern
Illustration 15 g00102647
This illustration is a typical example. This warning label is positioned on the right side of the cab. This warning label is on machines that are equipped with two-way valves or four-way valves.
g00102648
WHENEVER A CHANGE IS MADE TO THE MACHINES CONTROL PATTERN ALSO EXCHANGE THE PATTERN CARD IN THE CAB TO MATCH THE NEW PATTERN. FOLLOW THE CORRECT PROCEDURE IN THE OPERATOR AND MAINTENANCE MANUAL.
Machine Control Pattern
Illustration 16 g00102650
This illustration is a typical example. This warning label is positioned in the cab.
g00102651
CHECK MACHINE CONTROL PATTERN FOR CONFORMANCE TO PATTERN ON CARD IN CAB. IF NOT, CHANGE CARD TO MATCH PATTERN BEFORE OPERATING MACHINE. FAILURE TO DO SO COULD RESULT IN INJURY.
Flying Debris
Illustration 17 g00362055
This warning label is positioned on the demolition tool.
g00362157Flying stones and debris may cause personal injury. Maintain a minimum distance of 10 m (33 ft).Do Not Operate (Demolition Tool)
Illustration 18 g00362517
This warning label is positioned on the demolition tool.
g00362519
Do not operate or work on this attachment unless you have read and understand the instructions and warnings in the Operation And Maintenance Manual for both the attachment and base machine.Failure to follow the instructions or heed the warnings could result in injury or death.Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pedal Caterpillar catalog:
5080052
PEDAL AS-CONTROL
Caterpillar
Caterpillar
4796517
PEDAL AS
Caterpillar
Caterpillar
3862094
PEDAL AS
Caterpillar
Caterpillar
5486717
PEDAL AS
Caterpillar
Caterpillar
5486716
PEDAL AS
Caterpillar
Caterpillar
5237047
PEDAL AS
Caterpillar
Caterpillar
5049475
PEDAL AR-THIRD
Caterpillar
Caterpillar
5033806
PEDAL AR-THIRD
Caterpillar
Caterpillar
4388119
PEDAL GP-GOVERNOR & BRAKE
Caterpillar
Caterpillar
4364875
PEDAL GP
Caterpillar
Caterpillar
4364378
PEDAL GP
Caterpillar
Caterpillar
4308485
PEDAL AR-THIRD
Caterpillar
Caterpillar