PEDAL GP 3836002 - Caterpillar

Illustration 1.
Locations of components.
Illustration 2.
(SECTION X-X) Locations of components. 1. With the engine shut down, disconnect the lubrication lines (B) from the 7C-1190 Pump (A). As each lubrication line is disconnected, use 9L-8493 Caps and 9S-5518 Plugs to block of the lines and pump connections.2. Remove the two bolts (C) that fasten the pump (A) to the adapter (D). Remove the pump from the adapter.3. Remove the 7C-1642 Coupling (F).4. Be sure the O-ring seal (E) is in position adapter (D). Reinstall the pump (A) on the adapter (D) with two bolts (C). The lubrication lines (B) and pump ports should remain capped and plugged. If the mister lines are leaking, remove the lines. Leaking mister lines can result in a boost loss.