PEDAL AS 4728940 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-9509 Face Seal Plug 1
6V-9829 Cap As 1
B 185-3630 Strap Wrench As 1 Note: SERVICE DATA: TOOLING (A) AND TOOLING (B) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00904827
Remove filters (1) and (2).
Illustration 2 g00904829
Disconnect tube assembly (3).
Remove bolts (4).
Remove engine oil filter base (5). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
Illustration 3 g00904829
Install engine oil filter base (5).
Install bolts (4).
Connect tube assembly (3).
Illustration 4 g00904827
Install filters (1) and (2).