PEDAL GP-BRAKE 5258017 - Caterpillar

Removal Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00807971
Drain the oil from final drive planetary (3) into a suitable container. The capacity of the final drive planetary is 0.5 L (0.13 US gal). Refer to Operation and Maintenance Manual, KEBU7508, "Final Drive Planetary (Axle) Oil - Change" for the correct procedure.
Disconnect four hose assemblies (2) from axle propel motor (1) .
Position a suitable floor jack under axle propel motor (1). Remove four bolts (4). Remove axle propel motor (1) and the O-ring seal from final drive planetary (3). The weight of the axle propel motor is 36 kg (80 lb).