PICKUP-BLOWBY 8T2685 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01031556
Remove tube assemblies (2) and (3) from turbocharger (1). Check the condition of the O-ring seals on tube assemblies (2) and (3). Use new parts for replacement if the O-ring seals are worn or damaged.
Illustration 2 g01031557
Attach a suitable lifting device to turbocharger (1) .
Remove bolts (4) and turbocharger (1). The weight of the turbocharger is approximately 34 kg ( 75 lb).