PILOT 2J8268 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3 Start By:
Remove the electronic control module.
Remove the temperature control valve.
Remove the fuel filter housing.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the oil from the engine oil filter housing into a suitable container for storage or for disposal.
Illustration 1 g02408998
Attach Tooling (A) and a suitable lifting device onto engine oil filter housing (1). The weight of engine oil filter housing (1) is approximately 164 kg (362 lb). Remove bolts (2), elbows (3), and tube assemblies (5) and (6). Remove bolts (4).
Illustration 2 g02408999
Disconnect tube assembly (9) and (10). Remove bolts (11) and engine oil filter housing (1). Remove bolts (7) and remove support assembly (8). Installation Procedure
Install engine oil filter housing (1) in the reverse order of removal.