PILOT AS 5639215 - Caterpillar

Illustration 1 g01230306
Illustration 2 g01227802
Attach Tooling (A) and a suitable lifting device to platform (31). The weight of platform (31) is approximately 204 kg (450 lb). Install platform (31) and install bolts (32). Connect ground strap (33).
Illustration 3 g01227798
Connect hose assemblies (27) and (30) to selector valve (26). Repeat for the opposite side of selector valve (26). Connect hose assemblies (28) and (29) to selector valve (26). Repeat for the opposite side of selector valve (26).
Illustration 4 g01227776
Connect two hose assemblies (24) and (25).
Illustration 5 g01227775
Install panel (23).
Illustration 6 g01227774
Connect hose assemblies (21) and (22).
Illustration 7 g01227772
Install panels (20).
Illustration 8 g01227770
Close door (19).
Illustration 9 g01227685
Install cable strap (18) and connect clip (17).
Illustration 10 g01227679
Install clip (16). Connect harness assemblies (12), (13), (14), and (15).
Illustration 11 g01227653
Connect harness assemblies (10) and (11).
Illustration 12 g01227652
Connect negative battery cable assembly (8). Install bolt (9).
Illustration 13 g01227643
Connect hose assemblies (6) and (7) to the bottom of pilot valve (5) for the boom swing.
Illustration 14 g01227626
Connect hose assemblies (3) and (4) to the left side of travel valve (1).
Illustration 15 g01227625
Connect four hose assemblies (2) to the bottom of travel valve (1). End By:
Install the cab. Refer to Disassembly and Assembly, "Cab - Install".