PILOT ASSEM. 8S1061 - Caterpillar

The crankshaft changes the combustion forces in the cylinder into usable rotating torque. A vibration damper is used at the front of the crankshaft to reduce torsional vibrations (twist) that can damage the engine.The crankshaft drives a group of gears on the front and on the rear of the engine. The gear group on the front of the engine drives the oil pump, the jacket water pump, the fuel transfer pump, and the accessory drives.The rear gear group drives the camshafts and the accessory drives.Seals and wear sleeves are used at both ends of the crankshaft. The 3512 crankshaft is held in place by seven main bearings. The 3516 crankshaft is held in place by nine main bearings. A thrust plate at either side of the center main bearing controls the end play of the crankshaft.