AVSPARE.COM
parts catalog

PIN-DRIVE GEAR 0003419 - Caterpillar



0003419 PIN-DRIVE GEAR Caterpillar parts PIN
Rating:
56
Alternative (cross code) number:
CA0003419
000-3419
0003419
Caterpillar 0003419 PIN-DRIVE GEAR

Buy PIN-DRIVE GEAR 0003419 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Note: Ensure that the previous tests have been performed before you perform the steering test. Refer to Testing and Adjusting, "Final Hydrostatic Speed - Test". Failure to perform the previous tests could result in problems when you perform the steering test.The following test assumes that the ECM is set to the following parameters:
Maximum forward ground speed is 9.0 km/h (5.6 mph).
Reverse ground speed is 125% of forward ground speed.Refer to Testing and Adjusting, "Configuration" for additional information regarding the checking of the maximum ground speeds and for additional information regarding the setting of the maximum ground speeds.
Enter the machine.
Fasten the seat belt.
Start the machine and run the engine at LOW IDLE.
Depress the service brake pedal.
Release the parking brake.
Release the service brake.
Select the highest maximum ground speed setting.
Increase engine speed to HIGH IDLE.
Move the speed and direction control to the FORWARD


Parts pin Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.