AVSPARE.COM
parts catalog

PIN 0005215 - Caterpillar



0005215 PIN Caterpillar parts PIN
Rating:
61
Alternative (cross code) number:
CA0005215
000-5215
0005215
Caterpillar 0005215 PIN
Weight: 130 pounds 58 kg.

Buy PIN 0005215 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Makeup Valve Operation
Illustration 1 g01013711
(1) Crossover relief valve
(2) Spring chamber
(3) Spring
(4) Passage
(5) Spool
(6) Passage from the low pressure side of the drive loop
(7) Supply passage of charge oil from the hydraulic oil filter
(8) charge relief valve When the oil pressure in spring chamber (2) and the force of spring (3) is less than the charge oil pressure in passage (4), charge oil pressure forces valve spool (5) upward. Charge oil flows from passage (7) through passage (4) to spool (5). The oil flows past spool (5) through passage (6) back to the drive loop.Relief Valve Operation
Illustration 2 g01013713
(1) Crossover relief valve
(2) Spring
(3) Port
(4) Pilot valve
(5) Passage
(6) Spring
(7) Spring chamber
(8) Valve
(9) Passage
(10) Passage from the high pressure side of the drive loop
(11) Charge relief valve Oil flows from the drive loop to crossover relief valve (1) through passage (10). Hydraulic oil flows through passage (9) into spring chamber (7). Oil pressure combines with spring (6) in spring chamber (7) in order to hold valve (8) closed. The oil also acts against pilot valve (4) which is held closed by spring (2).If the oil pressure in spring chamber (7) rises enough to overcome the force of spring (2), the oil pressure causes pilot valve (4) to move upward. When pilot valve (4) moves upward, the valve opens a path for the oil in spring chamber (7) to flow from the pilot valve through port (3) to passage (5). Then, the oil flows from passage (5) to the outlet port of crossover relief valve (1).Since pilot valve (4) is open to the low pressure pilot oil circuit, hydraulic oil that is acting against valve (8) can now overcome the force of spring (6) in spring chamber (7). The oil pressure against valve (8) forces the valve upward and the valve opens.Because valve (8) is open, the oil flows through the pilot oil circuit. The oil flows through charge relief valve (11) to the case drain. Refer to Systems Operation, "Relief Valve (Charge)" for additional information on the operation of the charge relief valve. The open crossover relief valve prevents the oil pressure of the stalled circuit from increasing above the setting of the crossover relief valve.


Parts pin Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.