AVSPARE.COM
parts catalog

PIN 0005289 - Caterpillar



0005289 PIN Caterpillar parts PIN
Rating:
16
Alternative (cross code) number:
CA0005289
000-5289
0005289
Caterpillar 0005289 PIN
Weight: 1 pounds 0 kg.

Buy PIN 0005289 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Additional Notes
A key is a master key for the machine only when the key is programmed into the machine as a master key.The key is not automatically recognized as a master key for other MSS equipped machines in the fleet.
For more information about key management, refer to RENR2462.
If you are using a master key programmed for the machine, factory passwords are not required to modify the bypass mode or to add keys to the machine key list.
Factory passwords are always required in order to install the Machine Security System software on the ECM. Time - Set
You must set the correct date and time for the Machine Security System. Use the following procedure to set the date and time.
Connect the Cat ET to the service connector via the communication adapter.
Place the Master Access Level Key into the key start switch and turn the key to the ON position.
Start the Cat ET.
Click on the "Connect" icon in the menu bar of the Cat ET.
Illustration 9 g01071010
Once the Cat ET has established communications with the MSS ECM, select the "HYSTAT TRANS D5" ECM shown in the dialog box.
Click "OK" on the "ECM Selector" screen.
Go to the "Service" menu.
Select the "Configuration" option. The "Configuration" screen should appear.
Select the "Security Access Parameters" configuration for the "HYSTAT TRANS D5".
Select the "ECM date/time" option from the "Service" menu. This will cause Cat ET to display the screen shown in illustration 9.
Illustration 10 g01071017
Press the "Change" button. This will cause the "Date and Time" dialog box to appear. Refer to illustration 10.
Illustration 11 g01071024
Select the local time zone from the drop down list. Refer to illustration 11.
Illustration 12 g01071033
Enter the local date and time. Use an accurate time source. Refer to illustration 12.Note: Laptop clocks are not accurate and may have a different time than the local time.
Illustration 13 g01071034
Then press the "OK" button. The Cat ET will display the following message. Refer to illustration 13.
Illustration 14 g01071037
Click on the "Yes" button in order to change the date and time or click on the "No" button in order to cancel the change. Cat ET will display the new time on a 24-hour clock. Refer to illustration 14.Set Bypass Schedule
Note: The stat time and the stop time of the MSS must be configured for deactivation in order to decactivate the MSS for a period of time.
Insert a key with Master Access Level in the key start switch and turn the key to the ON position.
Select "Configuration" from the "Service" menu on the ET screen. The configuration screen appears.
Highlight the "Security System Bypass Start Time" for the day that is desired for bypassing the MSS.
Select the "Change" button at the bottom of the page. The "Change Parameter Value" field appears.
Enter the desired start time for the bypass in the "New Value" field. Note: All times are based on a 24 hour clock. That is, for a start time of 6:00 AM, enter 6:00. For a start time of 6:00 PM, enter 18:00. Include the colon that is used in the setting for the time.
Select


Parts pin Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.