parts catalog

PIN 0544516 - Caterpillar

0544516 PIN Caterpillar parts PIN
Alternative (cross code) number:
Caterpillar 0544516 PIN

Buy PIN 0544516 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Stage 2 of rework
Assembly instructions for addition of HP pipe clamp and bracket
(Items 14 through to 23)
14.Remove front 2 fuel manifold bolts (6I4793)and washer.
15.Assemble bracket (300-2940) to manifold
16.Fit two new M8 x 60LG bolts 6I4374 to hold bracket in
position. Do not tighten.
17.Assemble heavy duty clamp rubber and clamps (part numbers
280-1891, 280-1890, 280-1889, 241-4291)to HP pipe as
instructions 5 and 6 above. See figure 2 for orientation.
18.Slide clamp into place, aligning slotted hole with threaded
hole in bracket. Finger tighten M5 cap screw holding clamp in
19.Assemble M8 x 30LG (6I0254) bolt holding clamp to bracket.
The position of the bracket on the manifold may have to be
adjusted to make this easier. Align the clamp with the
N.B. Do not apply excessive pressure to the pipe.
20.Tighten M8 x 60LG bolts down to manifold to a torque of 22Nm
?5.5Nm. (16 ? 4 lbf ft)
21.Tighten M8 x 30LG bolt fastening clamp to bracket to a torque
of 22Nm ?5.5Nm. (16 ? 4 lbf ft)
22.Torque M5 cap screw to 10Nm ? 1.0Nm. ( 7 ? 0.7 lbf ft)
23.Finally cable tie the wiring loom tightly to the bracket to
prevent chafing, see figure 2 for position and orientation.

Parts pin Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.