PIN STOPPER 1033816 - Caterpillar

Configuring the Receiver
Web Interface Menus
Use the web interface to configure the receiver settings The web interface is available in the following languages:
English
Chinese
Dutch
Finnish
French
German
Italian
Japanese
Norwegian
Polish
Spanish
SwedishUse the "Configuration / Default Language" to select the default language for you use. The web interface shows the configuration menus on the left of the browser window, and the settings on the right. Each configuration menu contains related submenus to configure the receiver and monitor receiver performance.Note: The menus and options available depend on the type of receiver used.Supported Browsers
Browsers supported for "PCs" and laptops:
Google Chrome
Mozilla Firefox
Microsoft Internet Explorer for Windows operating systems
Opera
Apple SafariReceiver Status Menu
Receiver Status menu provides a quick link to review the available options, current firmware version, IP address, temperature, runtime, satellites tracked, current outputs, available memory, position information and more of the receiver.Satellites Menu
Use the "Satellites" menu to view satellite tracking details and enable/disable "GPS", "GLONASS", and "SBAS" satellites.Note: This menu should not be modified. Changing these parameters may degrade system performance.Data Logging Menu
Use the "Data Logging Menu" to set up the receiver to log static "GNSS" data. This menu is available only if the receiver has the "Data Logging" option enabled. You can also configure settings such as observable rate, position rate, continuous logging, continuous logging rate and auto delete old files if memory is low.Receiver Configuration Menu
Use the "Receiver Configuration Menu" to configure such settings as elevation mask, "PDOP" mask, antenna type and height, reference station position and reference station name and code.Note: This menu should not be modified. Changing these parameters may degrade system performance.I/O Configuration Menu
Use the "I/O Configuration Menu" to set up all outputs of the receiver. Depending on the specification the output of the receiver may be in the following forms, CMR, RTCM, RTCM-REPEAT, RT17/RT27, NMEA, GSOF and BINEX messages on various ports including TCP/IP, NTRIP, UDP, serial, or CAN Bluetooth, or radio ports.Note: This menu should not be modified. Changing these parameters may degrade system performance.Network Configuration Menu
Use the "Network Configuration Menu " to configure Ethernet settings, e-mail, alerts, PPP connection, HTTP port and FTP port settings of the receiver. For information on the Ethernet settings, see Configuring Ethernet settings.The "VFD" server port enables you to use the "SPS Modular Remote Control" application to view and navigate the receiver through a mock display and keypad interface. To allow the "SPS Modular Remote Control" to connect