1112106 PIN AS Caterpillar parts
D10N, D10R, D10T, D10T2
Rating:
Alternative (cross code) number:
CA1112106
111-2106
1112106
CA1112106
111-2106
1112106
Weight: 55 pounds 25 kg.
Information:
PIN LENGTH
319
mm
PIN OUTER DIAMERTER
101.6
mm
PIN PART NUMBER
1112107
PLATE PART NUMBER
4J1519
LUBE OUTLET
Y
MAX. THREAD SIZE
1.25-12
PIN END TYPE
LEAD TAPER
PIN TRANSV HOLE
N
PLATE FIXING HOLES
Y
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Cruisers Boat Pinstripe Decal V2328100 | 5/8 Inch Taupe Sticker (150 FT)
Generic Material: Vinyl || Color: White / Taupe ; Finish: Glossy || Overall Dimensions: 150' L x 5/8" W || Mount: Adhesive || Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate. Hardware and instruction / installation manual not included.
Generic Material: Vinyl || Color: White / Taupe ; Finish: Glossy || Overall Dimensions: 150' L x 5/8" W || Mount: Adhesive || Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate. Hardware and instruction / installation manual not included.
$12.76
29 Apr 2024
0.063[0.03] Pounds
Amazon.com
Toland Home Garden 1112106 Pumpkin Pigpile Halloween Flag 12x18 Inch Double Sided for Outdoor Jack O Lantern House Yard Decoration
Toland Home Garden DURABLE FLAG: Toland Home Garden's durable indoor, outdoor art flags and banners are made of machine washable 100% polyester || GARDEN FLAG SIZE: This Toland's 'Pumpkin Pigpile Flag' is the small, mini Garden size (12.5 x 18") || PRODUCED IN USA: Flags are printed in the USA creating colorful, vibrant, bright designs from original artwork || HOME DECOR: Since 1976, Toland has been producing premium, quality flags that make great gifts for any deck, patio, porch or veranda and make charming decorative statements for any backyard, lawn or garden || DOUBLE SIDED FLAG: Design is double sided with the image printed and visible from both sides. Artistic flags hang beautifully from a sewn-in sleeve and it’s easy to switch out our seasonal flag designs
Toland Home Garden DURABLE FLAG: Toland Home Garden's durable indoor, outdoor art flags and banners are made of machine washable 100% polyester || GARDEN FLAG SIZE: This Toland's 'Pumpkin Pigpile Flag' is the small, mini Garden size (12.5 x 18") || PRODUCED IN USA: Flags are printed in the USA creating colorful, vibrant, bright designs from original artwork || HOME DECOR: Since 1976, Toland has been producing premium, quality flags that make great gifts for any deck, patio, porch or veranda and make charming decorative statements for any backyard, lawn or garden || DOUBLE SIDED FLAG: Design is double sided with the image printed and visible from both sides. Artistic flags hang beautifully from a sewn-in sleeve and it’s easy to switch out our seasonal flag designs
$7.99
22 Jan 2024
0.063[0.03] Pounds
US: Toland Flags
Toland Home Garden 1112106 Pumpkin Pigpile Halloween Flag 12x18 Inch Double Sided for Outdoor Jack O Lantern House Yard Decoration
Toland Home Garden DURABLE FLAG: Toland Home Garden's durable indoor, outdoor art flags and banners are made of machine washable 100% polyester || GARDEN FLAG SIZE: This Toland's 'Pumpkin Pigpile Flag' is the small, mini Garden size (12.5 x 18") || PRODUCED IN USA: Flags are printed in the USA creating colorful, vibrant, bright designs from original artwork || HOME DECOR: Since 1976, Toland has been producing premium, quality flags that make great gifts for any deck, patio, porch or veranda and make charming decorative statements for any backyard, lawn or garden || DOUBLE SIDED FLAG: Design is double sided with the image printed and visible from both sides. Artistic flags hang beautifully from a sewn-in sleeve and it’s easy to switch out our seasonal flag designs
Toland Home Garden DURABLE FLAG: Toland Home Garden's durable indoor, outdoor art flags and banners are made of machine washable 100% polyester || GARDEN FLAG SIZE: This Toland's 'Pumpkin Pigpile Flag' is the small, mini Garden size (12.5 x 18") || PRODUCED IN USA: Flags are printed in the USA creating colorful, vibrant, bright designs from original artwork || HOME DECOR: Since 1976, Toland has been producing premium, quality flags that make great gifts for any deck, patio, porch or veranda and make charming decorative statements for any backyard, lawn or garden || DOUBLE SIDED FLAG: Design is double sided with the image printed and visible from both sides. Artistic flags hang beautifully from a sewn-in sleeve and it’s easy to switch out our seasonal flag designs
Number on catalog scheme:
4
For full view, you need register
Information:
System Operation Description:Use this procedure to troubleshoot the electrical system if a problem is suspected with the wastegate's solenoid or if one of the diagnostic codes in Table 1 is active.
Table 1
Diagnostic Codes Table
Code Conditions which Generate this Code System Response
526-5 Turbo Wastegate Drive : Current Below Normal The circuit driver for the electrohydraulic actuator's solenoid is energized. The Electronic Control Module (ECM) detects no current from the actuator or a current that is less than the normal level. The shutdown output is activated. The code is logged.
The engine is shut down.
526-6 Turbo Wastegate Drive : Current Above Normal The circuit driver for the electrohydraulic actuator's solenoid is energized. The ECM detects a current from the actuator that is greater than the normal level. The ECM controls the wastegate actuator by adjusting the current flow through the actuator's solenoid.The diagnostic code is probably caused by a problem with an electrical connector or with the wiring. The next likely cause is a problem inside the actuator solenoid. The least likely cause is a problem with the ECM.Logged diagnostic codes provide a historical record. Before you begin this procedure, use Caterpillar Electronic Technician (ET) to print the logged codes to a file.This troubleshooting procedure may generate additional diagnostic codes. Keep your mind on correcting the cause of the original diagnostic code. Clear the diagnostic codes after the problem is resolved.
Illustration 1 g01444497
Schematic of the circuit for the wastegate actuatorTest Step 1. Inspect the Electrical Connectors and WiringNote: This step is important for troubleshooting a problem with instability.
Illustration 2 g01431198
Terminal Box (1) ECM connector J2/P2 (2) ECM connector J1/P1 (3) 16 amp circuit breaker (4) Connectors J3/P3 for the customer's connector (5) Connectors J4/P4 for the optional control panel (if equipped) or for a customer's connector (6) J5/P5 connectors for the harness (7) J6/P6 connectors for the harness
Turn the engine control switch to the OFF position. Switch the 16 amp circuit breaker for the ECM OFF.Note: For the following steps, refer to Troubleshooting, "Electrical Connectors - Inspect".
Illustration 3 g01444485
P2 ECM terminals that are used by the solenoid for the wastegate on in-line engines and vee engines (P2-8) Wastegate actuator's circuit driver (P2-9) Return
Illustration 4 g01444489
Terminal locations on the P5 connector that are used by the solenoid for the wastegate on vee engines (P5-39) Return (P5-47) Wastegate actuator's circuit driver
Illustration 5 g01444487
Terminal locations on the P6 connector that are used by the solenoid for the wastegate on in-line engines (P6-13) Return (P6-23) Wastegate actuator's circuit driver
Illustration 6 g01444582
Typical view of the wastegate that is mounted on a vee engine (8) Solenoid for the wastegate actuator (9) Solenoid's connector (A) Wastegate actuator's circuit driver (B) Return
Illustration 7 g01444494
Typical view of the wastegate that is mounted on an in-line engine (10) Wastegate actuator (AA) Connectors for the wastegate actuator (A) Wastegate actuator's circuit driver (B) Return
Thoroughly inspect each of the following connectors:
ECM J2/P2 connectors
J5/P5 connectors on the terminal box
J6/P6 connectors on the terminal box
Connectors for the wastegate actuator
Check the
Table 1
Diagnostic Codes Table
Code Conditions which Generate this Code System Response
526-5 Turbo Wastegate Drive : Current Below Normal The circuit driver for the electrohydraulic actuator's solenoid is energized. The Electronic Control Module (ECM) detects no current from the actuator or a current that is less than the normal level. The shutdown output is activated. The code is logged.
The engine is shut down.
526-6 Turbo Wastegate Drive : Current Above Normal The circuit driver for the electrohydraulic actuator's solenoid is energized. The ECM detects a current from the actuator that is greater than the normal level. The ECM controls the wastegate actuator by adjusting the current flow through the actuator's solenoid.The diagnostic code is probably caused by a problem with an electrical connector or with the wiring. The next likely cause is a problem inside the actuator solenoid. The least likely cause is a problem with the ECM.Logged diagnostic codes provide a historical record. Before you begin this procedure, use Caterpillar Electronic Technician (ET) to print the logged codes to a file.This troubleshooting procedure may generate additional diagnostic codes. Keep your mind on correcting the cause of the original diagnostic code. Clear the diagnostic codes after the problem is resolved.
Illustration 1 g01444497
Schematic of the circuit for the wastegate actuatorTest Step 1. Inspect the Electrical Connectors and WiringNote: This step is important for troubleshooting a problem with instability.
Illustration 2 g01431198
Terminal Box (1) ECM connector J2/P2 (2) ECM connector J1/P1 (3) 16 amp circuit breaker (4) Connectors J3/P3 for the customer's connector (5) Connectors J4/P4 for the optional control panel (if equipped) or for a customer's connector (6) J5/P5 connectors for the harness (7) J6/P6 connectors for the harness
Turn the engine control switch to the OFF position. Switch the 16 amp circuit breaker for the ECM OFF.Note: For the following steps, refer to Troubleshooting, "Electrical Connectors - Inspect".
Illustration 3 g01444485
P2 ECM terminals that are used by the solenoid for the wastegate on in-line engines and vee engines (P2-8) Wastegate actuator's circuit driver (P2-9) Return
Illustration 4 g01444489
Terminal locations on the P5 connector that are used by the solenoid for the wastegate on vee engines (P5-39) Return (P5-47) Wastegate actuator's circuit driver
Illustration 5 g01444487
Terminal locations on the P6 connector that are used by the solenoid for the wastegate on in-line engines (P6-13) Return (P6-23) Wastegate actuator's circuit driver
Illustration 6 g01444582
Typical view of the wastegate that is mounted on a vee engine (8) Solenoid for the wastegate actuator (9) Solenoid's connector (A) Wastegate actuator's circuit driver (B) Return
Illustration 7 g01444494
Typical view of the wastegate that is mounted on an in-line engine (10) Wastegate actuator (AA) Connectors for the wastegate actuator (A) Wastegate actuator's circuit driver (B) Return
Thoroughly inspect each of the following connectors:
ECM J2/P2 connectors
J5/P5 connectors on the terminal box
J6/P6 connectors on the terminal box
Connectors for the wastegate actuator
Check the
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
814S, 824S, 854G, 854K, D10N, D10R, D10T, D10T2, D11N, D11R, D11T
D10R, D11N, D9L
10, D10, D10N, D11N, D9L, E650
D10N, D10R
D10N, D10R, D9L
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2
D10R, D11R, D11T
D10R, D10T, D10T2
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2, D9L
2D1511
PIN
12E, 140B, D10N, D10R, D9L
12E, 140B, D10N, D10R, D9L
1280571
PIN
D10N, D10R
D10N, D10R
D9N, D9R, D9T
9W4231
PIN AS
D9N, D9R
D9N, D9R
9W4235
PIN AS
D9N, D9R
D9N, D9R
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2