PIN 1130996 - Caterpillar

Disconnect tube assembly (9).
Illustration 5 g06088721
Remove bolt (10). Disconnect harness assembly (11).
Illustration 6 g06088722
Disconnect hose assemblies (12) and (13).
Illustration 7 g06088723
Disconnect hose assemblies (14).
Illustration 8 g06088726
Illustration 9 g06088727
Top of Cab
Use Tooling (B) and a suitable lifting device to raise tilt cylinder (15). The weight of tilt cylinder (15) is approximately 319 kg (703 lb).
Illustration 10 g06088728
Illustration 11 g06088740
Illustration 12 g06088759
Install suitable cribbing under lift cylinder (16). Remove bolt (17). Repeat this step for the opposite side.
Attach suitable lifting device to Tooling (C). The weight of Tooling (C) is approximately 36 kg (79 lb). Use Tooling (C) to remove pin assembly (18). Remove pin assembly (18). Repeat this step for the opposite side.
Illustration 13 g06088747
Typical Example
Attach a suitable lifting device onto lift arm assembly (19). The weight of lift arm assembly (19) is approximately 1078 kg (2376 lb).
Illustration 14 g06088749
Illustration 15 g06088751
Remove bolt (20). Attach suitable lifting device to Tooling (D). The weight of Tooling (D) is approximately 36 kg (79 lb). Use Tooling (D) to remove pin assembly (21). Remove pin assembly (21). Repeat this step for the opposite side.
Illustration 16 g06088747
Remove lift arm assembly (19).
Illustration 17 g06088752
Use Tooling (E) to remove bearing (22). Remove bearing (22).
Illustration 18 g06088754
Use Tooling (F) to remove bearing (23). Remove bearing (23).
Illustration 19 g06088755
Use Tooling (E) to remove bearings (24). Remove bearing (24).
Repeat Step 15 through Step 17 for the opposite side.