PIN 1178882 - Caterpillar

Illustration 1 g01138392
OFF - In order to disconnect the electrical power to the engine and to the machine, turn the switch in a counterclockwise direction to the OFF position (1) . Turn the key to the OFF position (1) before you try to restart the engine. Turn the key to the OFF position (1) in order to stop the engine.
ON - In order to activate the electrical circuits, turn the switch to the ON position (2) . When the key is released from the START position (3) , the key will return to the ON position (2) .
START - Turn the engine start switch to the START position (3) in order to crank the engine. Release the key as soon as the engine starts. Note: If the engine does not start, return the key to the OFF position before returning to the START position.The following conditions must be met before you start the engine:
All switches need to be turned OFF.
The parking brake should be ON.
The rotor should be turned OFF.
The propel lever should be in the SLOW position.
The remote stop switches should be pulled out to the ON position.
The grade/slope switch must be in the OFF position.
All conveyors should be turned OFF.
The steer selector switch should be in the REAR steer position.
The moldboard switch should be in the MANUAL position.For more information, refer to the Operation and Maintenance Manual, "Engine Starting" section.