1192863 PIN Caterpillar parts
318B, 319D, 319D LN, 320 L, 322 LN, 322B LN, 322C, 323D L, 323D LN, 325 LN
Rating:
Alternative (cross code) number:
CA1192863
119-2863
1192863
CA1192863
119-2863
1192863
Weight: 45 pounds 20 kg.
Information:
EFFECTIVE LENGTH
493
mm
HEAD OD
0
mm
OVERALL LENGTH
543
mm
PIN OD
79.85
mm
TRANSV HOLES
Y
DETENT BALL
N
END TYPE A
CHAMFER
END TYPE B
LEAD TAPER
GROOVE
N
HAND RING
N
HEAD THICKNESS
0
KEEPER SLOT
N
LUBE OUTLETS
N
COATING/PLATING
1E0586
THREAD SIZE MAX
M30X3.5
EXCAVATOR,
Related part:
1192863
PIN-YM
3148698
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
119-2863 1192863 3017967 301-7967 Bucket Pin Fits 320C 320B 320D
THREETREES
THREETREES
Number on catalog scheme:
8
For full view, you need register
Compatible equipment models: 1192863:
Information:
Disassemble the Starting Motor
Note: The disassembly and assembly that follows is of the 24 volt starting motor. The 12 volt is similar.
Table 1
Required Tools
Tool Part Number Part Description Quantity
A 1P-1855 Retaining Ring Pliers 1
B 1P-0510 Driver Gp 1
Illustration 1 g00810559
Disconnect wire assembly (4) from solenoid (1). Disconnect motor terminal connector (3) from the starting motor housing.
Remove three bolts (2) from the shift lever housing. Do not disassemble the solenoid. The parts inside the solenoid are not serviceable.
Illustration 2 g00818016
Remove the O-ring seal and bushing (5) .
Illustration 3 g00810580
Remove the nut (6). Remove the solenoid from the shift lever housing.
Illustration 4 g00810574
Remove the negative terminal nuts "-", wire assembly (2), and washers. Remove six bolts (8) and rear housing (7) .
Illustration 5 g00818558
If necessary, remove bushing (9) from the rear housing.
Illustration 6 g00810576
Remove washer (12) from the armature shaft. Lift brush springs (10) and pull the brushes away from the commutator. Position the brush springs (10) on the side of the brushes in order to hold the brushes in the holders.
Disconnect field winding leads (13) from brush holder (11). Remove the brush holder.
Illustration 7 g00818538
Remove brushes (15) and negative "-" terminal (14) from the brush holders.
Illustration 8 g00810579
Scribe a line on the pinion drive, the shift lever and the starting motor housings for the correct alignment at assembly.
Remove six bolts (17) and pinion drive housing (16) .
Illustration 9 g00810582
Remove retainer (18) with tool (A). Remove shift lever pin (20). If necessary, remove the O-ring seals from the shift lever pin.
Remove pinion drive (19) and the shift lever.
Illustration 10 g00810585
Remove the brake disc from the armature shaft. Remove five bolts (22), shift lever housing (21) and the washer. If necessary, remove the outside O-ring seals.
If necessary, remove the seal and the bushing from the shift lever housing.
Illustration 11 g00810588
Remove armature (22) from the starting motor housing.
Illustration 12 g00810589
Remove the following components from the starting motor housing: eight screws (26), pole shoes (25) and field winding coil (24). It may be necessary to use an impact driver to remove screws (26) .
Clean the armature, field winding coil and pinion drive with mineral spirits and a brush.Note: If the commutator is dirty, the commutator may be cleaned with Number 00 sandpaper. Do not use emery cloth.
Inspect all parts for wear and damage.
Note: The disassembly and assembly that follows is of the 24 volt starting motor. The 12 volt is similar.
Table 1
Required Tools
Tool Part Number Part Description Quantity
A 1P-1855 Retaining Ring Pliers 1
B 1P-0510 Driver Gp 1
Illustration 1 g00810559
Disconnect wire assembly (4) from solenoid (1). Disconnect motor terminal connector (3) from the starting motor housing.
Remove three bolts (2) from the shift lever housing. Do not disassemble the solenoid. The parts inside the solenoid are not serviceable.
Illustration 2 g00818016
Remove the O-ring seal and bushing (5) .
Illustration 3 g00810580
Remove the nut (6). Remove the solenoid from the shift lever housing.
Illustration 4 g00810574
Remove the negative terminal nuts "-", wire assembly (2), and washers. Remove six bolts (8) and rear housing (7) .
Illustration 5 g00818558
If necessary, remove bushing (9) from the rear housing.
Illustration 6 g00810576
Remove washer (12) from the armature shaft. Lift brush springs (10) and pull the brushes away from the commutator. Position the brush springs (10) on the side of the brushes in order to hold the brushes in the holders.
Disconnect field winding leads (13) from brush holder (11). Remove the brush holder.
Illustration 7 g00818538
Remove brushes (15) and negative "-" terminal (14) from the brush holders.
Illustration 8 g00810579
Scribe a line on the pinion drive, the shift lever and the starting motor housings for the correct alignment at assembly.
Remove six bolts (17) and pinion drive housing (16) .
Illustration 9 g00810582
Remove retainer (18) with tool (A). Remove shift lever pin (20). If necessary, remove the O-ring seals from the shift lever pin.
Remove pinion drive (19) and the shift lever.
Illustration 10 g00810585
Remove the brake disc from the armature shaft. Remove five bolts (22), shift lever housing (21) and the washer. If necessary, remove the outside O-ring seals.
If necessary, remove the seal and the bushing from the shift lever housing.
Illustration 11 g00810588
Remove armature (22) from the starting motor housing.
Illustration 12 g00810589
Remove the following components from the starting motor housing: eight screws (26), pole shoes (25) and field winding coil (24). It may be necessary to use an impact driver to remove screws (26) .
Clean the armature, field winding coil and pinion drive with mineral spirits and a brush.Note: If the commutator is dirty, the commutator may be cleaned with Number 00 sandpaper. Do not use emery cloth.
Inspect all parts for wear and damage.
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
322C, 322C FM, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L, 521B, 522B
322C, 325C, 330C, 330C FM, 330C L, 385B, 385C L
322C
322C FM, 323E L, 324D FM, 324D FM LL, 325, 325 L, 325 LN, 325B L, 325C, 325C FM, 325D, 325D L, 325D MH, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, OEMS
320D, 320D LRR, 323D L, 323D LN
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E LN, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L
320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330D L
320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D F...
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 325D,...
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 325D,...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L
325, 325 L, 325 LN, 325B, 325B L, M325B
318B, 318C, 319C, 319D, 319D L, 319D LN, 320B, 320B L, 320C, 320C FM, 320C L, 321B, 321C, 322, 322 FM L, 322B L, 322C, 325, 325 L, 325 LN, 325B L, 325C, 325C L, 330B L, 330C, 330D L, 345B II, 345B L
318B, 320 L, 320B, 320C, 320N, 322 LN, 322B LN, 325, 325 LN, 325B, 325B L, 325C, 325C FM, 330C L, 345B L, 350, 350 L, 375, 5080, G107B, PIN GRAB
318B, 318C, 319C, 319D, 320 L, 320B, 320C, 322 LN, 322B LN, 322C, 325B L, 325C, 330B L, 330C, 345B II, 345B L
1483217
PIN AS
318B, 318C, 319C
318B, 318C, 319C
318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC...
1483292
PIN
318B, 318C, 319C
318B, 318C, 319C
1394522
PIN AS
301.5
301.5
1394521
PIN AS
301.5
301.5
1534794
PIN-CLEVIS
301.5, 302.5, 303.5, 304.5, 902
301.5, 302.5, 303.5, 304.5, 902
1483299
PIN AS
318B, 318C, 319C, 319D, 319D L, 319D LN
318B, 318C, 319C, 319D, 319D L, 319D LN
318B, 318C, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320D, 320E LN, 320N, 322B LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 345B II, 345B L, 5080
318B, 318C, 319C, 320 L, 320B, 320C, 322 LN, 325 LN, 325B L, 325C, 330B L, 330C, 345B II, 345B L