1269461 PIN Caterpillar parts
318B, 318C, 319C, 320 L, 320B, 320C, 322 LN, 325 LN, 325B L, 325C, 330B L, 330C, 345B II, 345B L
Rating:
Alternative (cross code) number:
CA1269461
126-9461
1269461
CA1269461
126-9461
1269461
Weight: 28 pounds 12 kg.
EXCAVATOR,
Related part:
1269461
PIN-LKGE BKT-YM
3924528
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Compatible equipment models: 1269461:
Information:
Assemble the Starting Motor
Table 1
Required Tools    
Tool    Part Number    Part Description    Quantity    
A     1P-1855     Retaining Ring Pliers     1    
B     1P-0510     Driver Gp     1    
Illustration 1 g00810589
Put SAE 20W oil on all bushings, seals and oil wicks.
Put field winding coil (24) and pole shoes (25) in position in the starting motor housing. Put 9s-3263 Thread Lock Compound on the threads of screws (26). Tighten screws (26) to a torque of 20.3 2.3 N m (179.7 20.4 lb in).
Illustration 2 g00810588
Put 5P-0960 Molybdenum Grease on the armature bushing areas. Do not put grease on the armature core or the commutator. Put armature (23) into the starting motor housing.
Illustration 3 g00810585
Install the outside O-ring seals if it is necessary. Install the shift lever housing (21). Install five bolts (22). Install the brake disc on the armature shaft.
Illustration 4 g00810582
Install the pinion drive (19) and the shift lever. Install the O-ring seal if it is necessary. Install the shift lever pin (20). Install the retainer (18) with tool (A) .
Illustration 5 g00810579
Align the pinion drive housing (16). Install six bolts (17) .
Illustration 6 g00818538
Install brushes (15) and negative "-"terminal (14) in the brush holders. Install brush spring (10) against the side of each brush.
Illustration 7 g00810576
Install the brush holder. Connect the field winding leads (13) to the brush holder (11) .
Put the washer (12) onto the armature assembly. Push the brushes (10) into the holders so that the springs are on top of the brushes.
Illustration 8 g00818558
Install the bushing (9) into the rear housing if it is necessary.
Illustration 9 g00810574
Install six bolts (8) and rear housing (7). Torque bolts (8) to 5.7 1.1 N m (50.4 9.7 lb in). Install wire assembly (2), washers, and negative terminal nuts "-".
Illustration 10 g00810559
Install solenoid (1). Align the solenoid link with the hole in the shift lever. Install three bolts (2) in the shift lever housing. Torque bolts (2) to 17.8 3.7 N m (157.5 32.7 lb in).
Install wire assembly (4). Connect motor terminal "MTR" (3) to the starter motor housing.
Illustration 11 g00810580
Install pinion clearance adjustment nut (6) .
Adjust pinion clearance. Refer to Testing and Adjusting, "Pinion Clearance - Adjust" for pinion clearance adjustments.
Illustration 12 g00818016
Install the O-ring seal and bushing (5) .
Table 1
Required Tools    
Tool    Part Number    Part Description    Quantity    
A     1P-1855     Retaining Ring Pliers     1    
B     1P-0510     Driver Gp     1    
Illustration 1 g00810589
Put SAE 20W oil on all bushings, seals and oil wicks.
Put field winding coil (24) and pole shoes (25) in position in the starting motor housing. Put 9s-3263 Thread Lock Compound on the threads of screws (26). Tighten screws (26) to a torque of 20.3 2.3 N m (179.7 20.4 lb in).
Illustration 2 g00810588
Put 5P-0960 Molybdenum Grease on the armature bushing areas. Do not put grease on the armature core or the commutator. Put armature (23) into the starting motor housing.
Illustration 3 g00810585
Install the outside O-ring seals if it is necessary. Install the shift lever housing (21). Install five bolts (22). Install the brake disc on the armature shaft.
Illustration 4 g00810582
Install the pinion drive (19) and the shift lever. Install the O-ring seal if it is necessary. Install the shift lever pin (20). Install the retainer (18) with tool (A) .
Illustration 5 g00810579
Align the pinion drive housing (16). Install six bolts (17) .
Illustration 6 g00818538
Install brushes (15) and negative "-"terminal (14) in the brush holders. Install brush spring (10) against the side of each brush.
Illustration 7 g00810576
Install the brush holder. Connect the field winding leads (13) to the brush holder (11) .
Put the washer (12) onto the armature assembly. Push the brushes (10) into the holders so that the springs are on top of the brushes.
Illustration 8 g00818558
Install the bushing (9) into the rear housing if it is necessary.
Illustration 9 g00810574
Install six bolts (8) and rear housing (7). Torque bolts (8) to 5.7 1.1 N m (50.4 9.7 lb in). Install wire assembly (2), washers, and negative terminal nuts "-".
Illustration 10 g00810559
Install solenoid (1). Align the solenoid link with the hole in the shift lever. Install three bolts (2) in the shift lever housing. Torque bolts (2) to 17.8 3.7 N m (157.5 32.7 lb in).
Install wire assembly (4). Connect motor terminal "MTR" (3) to the starter motor housing.
Illustration 11 g00810580
Install pinion clearance adjustment nut (6) .
Adjust pinion clearance. Refer to Testing and Adjusting, "Pinion Clearance - Adjust" for pinion clearance adjustments.
Illustration 12 g00818016
Install the O-ring seal and bushing (5) .
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
1152775
PIN AS
325B, 325B L, M325B
325B, 325B L, M325B
1896064
PIN AS
330B L, 330C, 330C L
330B L, 330C, 330C L
1896062
PIN AS
330B L, 330C, 330C L
330B L, 330C, 330C L
1304342
PIN AS
345B, 345B II, 345B II MH, 345B L, W345B II
345B, 345B II, 345B II MH, 345B L, W345B II
1413477
PIN
345B II, 345B II MH, 345B L, 365B II, 385B
345B II, 345B II MH, 345B L, 365B II, 385B
1413476
PIN
345B II, 345B II MH, 345B L, 365B II, 385B
345B II, 345B II MH, 345B L, 365B II, 385B
1413479
PIN
345B II, 345B L
345B II, 345B L
1413478
PIN
345B II, 345B L
345B II, 345B L
1633491
PIN
345B II, 345B L
345B II, 345B L
1413550
PIN AS
345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B II, 385B
345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B II, 385B
3739528
PIN AS
325C, 325D L, 330C, 330D L, 345B II, 345C L, 365B, 365B II, 365C, 365C L, 385B, 385C L
325C, 325D L, 330C, 330D L, 345B II, 345C L, 365B, 365B II, 365C, 365C L, 385B, 385C L
2012837
PIN
330C, 330C L
330C, 330C L
1192863
PIN
318B, 319D, 319D LN, 320 L, 322 LN, 322B LN, 322C, 323D L, 323D LN, 325 LN
318B, 319D, 319D LN, 320 L, 322 LN, 322B LN, 322C, 323D L, 323D LN, 325 LN
0875845
PIN
318B, 318C, 319C, 319D, 319D L, 319D LN, 320B, 320B L, 320C, 320C FM, 320C L, 321B, 321C, 322, 322 FM L, 322B L, 322C, 325, 325 L, 325 LN, 325B L, 325C, 325C L, 330B L, 330C, 330D L, 345B II, 345B L
318B, 318C, 319C, 319D, 319D L, 319D LN, 320B, 320B L, 320C, 320C FM, 320C L, 321B, 321C, 322, 322 FM L, 322B L, 322C, 325, 325 L, 325 LN, 325B L, 325C, 325C L, 330B L, 330C, 330D L, 345B II, 345B L
7Y2357
PIN
318B, 320 L, 320B, 320C, 320N, 322 LN, 322B LN, 325, 325 LN, 325B, 325B L, 325C, 325C FM, 330C L, 345B L, 350, 350 L, 375, 5080, G107B, PIN GRAB
318B, 320 L, 320B, 320C, 320N, 322 LN, 322B LN, 325, 325 LN, 325B, 325B L, 325C, 325C FM, 330C L, 345B L, 350, 350 L, 375, 5080, G107B, PIN GRAB
1080980
PIN AS
318B, 318C, 319C, 319D, 320 L, 320B, 320C, 322 LN, 322B LN, 322C, 325B L, 325C, 330B L, 330C, 345B II, 345B L
318B, 318C, 319C, 319D, 320 L, 320B, 320C, 322 LN, 322B LN, 322C, 325B L, 325C, 330B L, 330C, 345B II, 345B L
1483217
PIN AS
318B, 318C, 319C
318B, 318C, 319C
4I4809
PIN AS
318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC...
318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC...
1394839
PIN AS
301.5
301.5
1394522
PIN AS
301.5
301.5
1394521
PIN AS
301.5
301.5
1534794
PIN-CLEVIS
301.5, 302.5, 303.5, 304.5, 902
301.5, 302.5, 303.5, 304.5, 902
1483299
PIN AS
318B, 318C, 319C, 319D, 319D L, 319D LN
318B, 318C, 319C, 319D, 319D L, 319D LN
4I4814
PIN AS
318B, 318C, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320D, 320E LN, 320N, 322B LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 345B II, 345B L, 5080
318B, 318C, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320D, 320E LN, 320N, 322B LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 345B II, 345B L, 5080