PIN 1343080 - Caterpillar

Assembly Procedure 1
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6246 Adapter 1
133-8951 Thrust Bearing Screw 1
B 126-8290 Spanner Wrench 2
C 9U-6251 Suspension Yoke 1
D 1U-5230 Hand Hydraulic Pump 1
4S-6667 Hose Assembly 1
E 9U-6244 Support 1
F FT-1921 Guide Pin 1
FT-1922 Guide Pin 2
G 9U-6255 Turbocharger Tool 1
H 6V-2055 Grease 1
J 9S-3263 Thread Lock Compound 1
K 2S-3230 Bearing Lubricant 1
L 138-7575 Link Bracket 2
M 4C-5592 Anti-Seize Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00922940
Assemble exhaust inlet (22). Install turbine inlet nozzle (25). Install the shroud (24). Use Tooling (M) on the threads of the bolts.
Attach exhaust inlet (22) to main support housing (23). Ensure that the inlet openings are located at the correct positions for the exhaust manifolds.
Illustration 2 g00596727
Assemble turbine end bearing (20). Install turbine end bearing (20) in bearing housing (8). Secure the bearing assembly with bolts (21).
Illustration 3 g00596728
Place a new O-ring seal on housing (19). Lubricate the seal. Install seal housing (19) with new locks (17) on bolts (18). Bend the tabs.
Illustration 4 g00596729
Put Tooling (H) in the seal groove. Install a new shaft seal. Install the turbine and shaft assembly (16) into housing (8).
Illustration 5 g00596730
Tie the turbine and shaft assembly (16) to housing (8) in order to prevent damage.
Illustration 6 g00596161
Install thrust bearing (13) into Tooling (A).