1381870 PIN AS Caterpillar parts
988G, 988H
Rating:
Alternative (cross code) number:
CA1381870
138-1870
1381870
CA1381870
138-1870
1381870
Weight: 11 pounds 5 kg.
Information:
PIN LENGTH
195
mm
PIN OUTER DIAMERTER
59.85
mm
PIN PART NUMBER
1381871
PLATE PART NUMBER
1719841
LUBE OUTLET
N
PIN END TYPE
LEAD TAPER
PIN TRANSV HOLE
N
PLATE FIXING HOLES
Y
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
ZEHYDDM Replacement for fits 1381870 Pin As Fits Caterpillar Models
ZEHYDDM
ZEHYDDM
$69.00
25 Jul 2023
13.0[5.85] Pounds
KW: GHR SPARES PART
1381870 Pin AS Fits Caterpillar 988G 988H
TCP Warranty
TCP Warranty
$34.43
23 Jul 2021
US: Yurk
Yurk Fruit Picker Twist-On Harvester Basket with Cushion for Fruits Apples Avocados-Fruit Picker-Cherry Picker-Fruit Picker Pole with Basket telescoping-Fruit Picker Tool-Picker-Fruit Picker Pole
Yurk You don’t need to worry, our fruit picker won't crack or break-Fruit picker basket-Citrus picker-Fruit tree picker-Fruit picker pole-Fruit picking baskets-Fruit picking pole-Fruit grabber || - Simply twist the picking tool onto any standard threaded household pole.-Fruit picker pole with basket-Picking basket-Extendable aluminum pole-Fruit basket picker-Fruit picker pole with basket || Fruit picking pole basket-Picking tools-Booster for fruit plants-Tools for trees-Fruit catcher for trees-Fruit picking pole-Tool for fruit-Citrus picker pole with basket
Yurk You don’t need to worry, our fruit picker won't crack or break-Fruit picker basket-Citrus picker-Fruit tree picker-Fruit picker pole-Fruit picking baskets-Fruit picking pole-Fruit grabber || - Simply twist the picking tool onto any standard threaded household pole.-Fruit picker pole with basket-Picking basket-Extendable aluminum pole-Fruit basket picker-Fruit picker pole with basket || Fruit picking pole basket-Picking tools-Booster for fruit plants-Tools for trees-Fruit catcher for trees-Fruit picking pole-Tool for fruit-Citrus picker pole with basket
Number on catalog scheme:
5
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the air inlet manifold. Refer to Disassembly and Assembly, "Inlet Manifold - Remove".
Remove the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00599562
Remove fuel lines (2) from the engine. Immediately cap all openings or plug all openings in order to prevent contamination of the fuel system.
Remove bolts (1) and cover (3) from the engine.
Illustration 2 g00720261
Disconnect spring (5) from the groove in pin (4) .
Illustration 3 g00720270
Note: Spring (6) may fall into the engine if the spring comes loose from pin (4) .
Disconnect spring (6) from the groove in pin (4) .
Illustration 4 g00720275
Disconnect governor control linkage (9) from pin (4) .
Illustration 5 g00720284
Remove bolts (10) and nuts (11) that secure the fuel injection pump to the engine.
Illustration 6 g00720291
Remove fuel injection pump (12) from the engine.Note: Record the thickness of each shim and the number of shims for reassembly. The fuel injection timing is determined by the shim pack thickness that is between the fuel injection pump and the mounting face on the cylinder block. For more information on the fuel injection pump, refer to the Specifications Module, "Fuel Injection Pump" topic.
Remove shims (14) from fuel injection pump (12) .
Inspect dowels (15) for damage. If the dowels are damaged, use new dowels for replacement.
Inspect pin (4) for wear or damage. If pin (4) is worn or damaged, use a new pin for replacement.
Cover the opening in the fuel injection pump housing for fuel injection pump (12) in order to prevent debris from falling into the engine.
Start By:
Remove the air inlet manifold. Refer to Disassembly and Assembly, "Inlet Manifold - Remove".
Remove the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00599562
Remove fuel lines (2) from the engine. Immediately cap all openings or plug all openings in order to prevent contamination of the fuel system.
Remove bolts (1) and cover (3) from the engine.
Illustration 2 g00720261
Disconnect spring (5) from the groove in pin (4) .
Illustration 3 g00720270
Note: Spring (6) may fall into the engine if the spring comes loose from pin (4) .
Disconnect spring (6) from the groove in pin (4) .
Illustration 4 g00720275
Disconnect governor control linkage (9) from pin (4) .
Illustration 5 g00720284
Remove bolts (10) and nuts (11) that secure the fuel injection pump to the engine.
Illustration 6 g00720291
Remove fuel injection pump (12) from the engine.Note: Record the thickness of each shim and the number of shims for reassembly. The fuel injection timing is determined by the shim pack thickness that is between the fuel injection pump and the mounting face on the cylinder block. For more information on the fuel injection pump, refer to the Specifications Module, "Fuel Injection Pump" topic.
Remove shims (14) from fuel injection pump (12) .
Inspect dowels (15) for damage. If the dowels are damaged, use new dowels for replacement.
Inspect pin (4) for wear or damage. If pin (4) is worn or damaged, use a new pin for replacement.
Cover the opening in the fuel injection pump housing for fuel injection pump (12) in order to prevent debris from falling into the engine.
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
345B II, 345C L, 350, 365B, 365B II, 365C, 365C L, 374D L, 375, 375 L, 385B, 385C, 385C L, 390D, 5080, 5110B, 5230, 980G, 988H, 988K, 990, 990 II, 990H, 992G
980G, 980G II, 980H, 980K, 980M, 982M, 986H, 988B, 988F, 988F II, 988G, 988H
988F II, 988G, 990 II, 992G
834G, 834H, 834K, 836G, 836H, 836K, 988G, 988H, 988K, AD45B, AD55, AD55B, AD60
988G, 988H
988G, 988H
988G, 988H
988G, 988H, 988K
988G, 988H
988G, 988H
988G, 988H
834H, 836H, 988H
834G, 988G, AD45B, AD55, AD55B, AD60
834G, 834H, 834K, 836G, 836H, 836K, 988G, 988H, 988K, AD45B, AD55, AD55B, AD60
16G, 966G, 966G II, 972G, 972G II, M325B
966G, 966G II, 972G, 972G II
824K, 825K, 826K, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE
9M7406
PIN
966G, 972G, D7F, D7G
966G, 972G, D7F, D7G
988G, 988H
988G, 988H, 988K
988G, 988H
988G, 988H
988G, 988H
1917596
PIN
797, 834G, 834H, 836G, 836H, 844K, 854K, 988G, 988H, 990K, 992K, 993K, D8T, D9T
797, 834G, 834H, 836G, 836H, 844K, 854K, 988G, 988H, 990K, 992K, 993K, D8T, D9T