1483391 PIN Caterpillar parts
345B, 345B II, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, W345C MH
Rating:
Alternative (cross code) number:
CA1483391
148-3391
1483391
CA1483391
148-3391
1483391
Weight: 154 pounds 69 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1483391 PIN (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 187.44 lbs || Dimensions: 10-10-42.87 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 187.44 lbs || Dimensions: 10-10-42.87 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
1483391 PIN (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 187.44 lbs || Dimensions: 10-10-42.87 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 187.44 lbs || Dimensions: 10-10-42.87 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
1483391 Pin Fits Caterpillar Excavator Models 345C L 345B II 349D 345D L VG 345B 345C MH 349D2 349D L 349D2 L 345B L
Sourcefy Made with the Highest Quality Components Available || 6 Months Unlimited Warranty || Pressure and Computer tested for consistent Quality and unsurpassed reliability || This pin fits the Wheeled Excavator W345C MH and Excavator models: 345C, L345B, 349D, L345D, L345B II, 345C MH, 349D2, L345D, 349D, 349D2, 345B L, 345C, and 345D L VG.
Sourcefy Made with the Highest Quality Components Available || 6 Months Unlimited Warranty || Pressure and Computer tested for consistent Quality and unsurpassed reliability || This pin fits the Wheeled Excavator W345C MH and Excavator models: 345C, L345B, 349D, L345D, L345B II, 345C MH, 349D2, L345D, 349D, 349D2, 345B L, 345C, and 345D L VG.
Number on catalog scheme:
9
For full view, you need register
Compatible equipment models: 1483391:
Information:
The most accurate check of the engine oil level is obtained when the engine is stopped.
Illustration 1 g02864739
(1) Filler cap
(2) Engine oil level gauge (dipstick)
Remove filler cap in order to ensure that the crankcase pressure is equal to the atmospheric pressure. Excess pressure or a slight vacuum will affect engine oil level that is measured.
Ensure that engine oil level gauge is seated.
Illustration 2 g02864756
(3) "ENGINE STOPPED WITH OIL COLD" side
(4) "ENGINE AT LOW IDLE WITH WARM OIL" side
(5) "ADD" mark
(6) "FULL" mark
If the engine is stopped, remove the engine oil level gauge. Observe the engine oil level on "ENGINE STOPPED WITH OIL COLD" side.
If the engine is operating, reduce the engine speed to low idle. Remove the engine oil level gauge and observe the engine oil level on "ENGINE AT LOW IDLE WITH WARM OIL" side . The engine oil level should be between "ADD" mark and "FULL" mark.
Engine damage can occur if the crankcase is filled above the "FULL" mark on the oil level gauge (dipstick).An overfull crankcase can cause the crankshaft to dip into the oil. This will reduce the power that is developed and also force air bubbles into the oil. These bubbles (foam) can cause the following problems: reduction of the oil's ability to lubricate, reduction of oil pressure, inadequate cooling, oil blowing out of the crankcase breathers and excessive oil consumption.Excessive oil consumption will cause deposits to form on the pistons and in the combustion chamber. Deposits in the combustion chamber lead to the following problems: guttering of the valves, packing of carbon under the piston rings and wear of the cylinder liner.If the oil level is above the "FULL" mark on the oil level gauge, drain some of the oil immediately.
If necessary, add engine oil. For the correct engine oil to use, refer to this Operation and Maintenance Manual, "Fluid Recommendations" topic. Do not fill the crankcase above the "FULL" mark on the engine oil level gauge. Clean the filler cap. Install the filler cap.
Record the amount of engine oil that is added. For the next engine oil sample and analysis, include the total amount of engine oil that has been added since the previous oil change. This record will help to provide the most accurate analysis.
Illustration 1 g02864739
(1) Filler cap
(2) Engine oil level gauge (dipstick)
Remove filler cap in order to ensure that the crankcase pressure is equal to the atmospheric pressure. Excess pressure or a slight vacuum will affect engine oil level that is measured.
Ensure that engine oil level gauge is seated.
Illustration 2 g02864756
(3) "ENGINE STOPPED WITH OIL COLD" side
(4) "ENGINE AT LOW IDLE WITH WARM OIL" side
(5) "ADD" mark
(6) "FULL" mark
If the engine is stopped, remove the engine oil level gauge. Observe the engine oil level on "ENGINE STOPPED WITH OIL COLD" side.
If the engine is operating, reduce the engine speed to low idle. Remove the engine oil level gauge and observe the engine oil level on "ENGINE AT LOW IDLE WITH WARM OIL" side . The engine oil level should be between "ADD" mark and "FULL" mark.
Engine damage can occur if the crankcase is filled above the "FULL" mark on the oil level gauge (dipstick).An overfull crankcase can cause the crankshaft to dip into the oil. This will reduce the power that is developed and also force air bubbles into the oil. These bubbles (foam) can cause the following problems: reduction of the oil's ability to lubricate, reduction of oil pressure, inadequate cooling, oil blowing out of the crankcase breathers and excessive oil consumption.Excessive oil consumption will cause deposits to form on the pistons and in the combustion chamber. Deposits in the combustion chamber lead to the following problems: guttering of the valves, packing of carbon under the piston rings and wear of the cylinder liner.If the oil level is above the "FULL" mark on the oil level gauge, drain some of the oil immediately.
If necessary, add engine oil. For the correct engine oil to use, refer to this Operation and Maintenance Manual, "Fluid Recommendations" topic. Do not fill the crankcase above the "FULL" mark on the engine oil level gauge. Clean the filler cap. Install the filler cap.
Record the amount of engine oil that is added. For the next engine oil sample and analysis, include the total amount of engine oil that has been added since the previous oil change. This record will help to provide the most accurate analysis.
Cat SIS web machinery list:
Parts pin Caterpillar catalog:
345B II, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, W345C MH
330, 330 FM L, 330 L, 330B, 330B L, 330C FM, 330D FM, 345B II, 345B L, 345C, 350 L, W330B
345B II, 345B L, 350
345B II, 345B L, 350
330, 330 FM L, 330 L, 330B, 330B L, 345B, 345B L, W330B
345B, 345B II, 345B II MH, 345B L, W345B II
345B II, 345B II MH, 345B L, 365B II, 385B
345B II, 345B II MH, 345B L, 365B II, 385B
345B II, 345B L
345B II, 345B L
345B II, 345B L
345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B II, 385B
345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B
3439249
PIN AS
329E, 329E L, 329E LN
329E, 329E L, 329E LN
3415025
PIN AS
329E, 329E L, 329E LN
329E, 329E L, 329E LN
3782407
PIN
STIFF LINK
STIFF LINK
3782477
PIN
STIFF LINK
STIFF LINK
3782444
PIN
STIFF LINK
STIFF LINK
2485978
PIN
336E
336E
4190985
PIN AS
16M
16M
4309577
PIN AS
16M
16M
3993125
PIN
HM825, MD-250
HM825, MD-250
4166982
PIN-SPRING
HM825, MD-250
HM825, MD-250
345B II, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, W345C MH