1554094 PIN-SPRING Caterpillar parts
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230B, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 797, 797B, 854G, 992G, 994D, 994F...
Rating:
Alternative (cross code) number:
CA1554094
155-4094
1554094
CA1554094
155-4094
1554094
Weight: 0.02 pounds 0 kg.
Information:
LENGTH
28.5
mm
OUTSIDE PIN DIAMETER
19.67
mm
GEN SET ENGINE, WHEEL LOADER,
Information:
Illustration 1 g00329183
Customer Communication Module (CCM)The customer communication module (CCM) provides a communication link between the GSC+ and the host computer of the customer. The CCM converts data from the standard RS-232C format to the CAT Data Link format. The CCM can also convert data from the CAT Data Link format to the standard RS-232C format. The RS-232C cable is available at most stores that sell electronic equipment. Caterpillar's 146-8488 RS-232C is a suitable cable. The CCM allows an operator to remotely control the same information that is available on the GSC+ display at the host computer.The CCM can remotely control the following functions when the GSC+ is in the normal mode with the engine control switch (ECS) in the AUTO position.
Start the engine.
Stop the engine if the remote start/stop contact is not closed.
Activate or deactivate the electronic governor relay (EGR), provided that the low oil pressure shutdown setpoint has been exceeded.
Activate the GFR or deactivate the GFR, provided that the GSC+ has not detected a fault. In this case, the GSC+ will already have activated the GFR.
Remotely abort the cooldown.
Remotely control the spare output.
Remotely control the programmable spare relay.Note: The CCM can only control the spare output in an active low type of configuration. See System Operation, "Spare Input/Output Programming OP6" for more information.The addition of a specified modem allows two-way communication when the generator set and the host computer are separated by great distances. For more information regarding the CCM, see the Operations And Maintenance Manual, SEBU6874, "Customer Communication Module (CCM) for Diesel Engines".
Cat SIS web machinery list:
Parts pin Caterpillar catalog:
9J6689
PIN AS
854G, D10N, D10R, D10T, D10T2, D9L
854G, D10N, D10R, D10T, D10T2, D9L
8P8827
PIN
D10, D11N, D11R, D11T
D10, D11N, D11R, D11T
3T7792
PIN
D11N, D11R, D11T
D11N, D11R, D11T
7T9311
PIN AS-CARTRIDGE
D10, D11N, D11R, D11T
D10, D11N, D11R, D11T
9J2364
PIN
10S, 854G, 854K, D10, D11N, D11R
10S, 854G, 854K, D10, D11N, D11R
9W2939
PIN
854G, 854K, D10N, D10R, D10T, D10T2, D11N, D11R, D11T
854G, 854K, D10N, D10R, D10T, D10T2, D11N, D11R, D11T
6J5985
PIN
814S, 824S, 854G, 854K, D10N, D10R, D10T, D10T2, D11N, D11R, D11T
814S, 824S, 854G, 854K, D10N, D10R, D10T, D10T2, D11N, D11R, D11T
9J2593
PIN
10S, 854G, 854K, D10, D11N, D11R, D11T
10S, 854G, 854K, D10, D11N, D11R, D11T
9J6691
PIN AS
D10R, D11N, D9L
D10R, D11N, D9L
3G0500
PIN AS
10, D10, D10N, D11N, D9L, E650
10, D10, D10N, D11N, D9L, E650
1279189
PIN
D10R, D11R, D11T
D10R, D11R, D11T
1303434
PIN
D11R, D11T
D11R, D11T
1541584
PIN-SPRING
3508, 3508B, 3508C, 3512, 3516, 3516B, 5130, 5230, 776C, 784B, 785, 785B, 789B, 793B, 994, D11N, D11R, G3508, G3508B, G3512, G3512B, G3512E, G3516, G3516B, G3516C, G3516E, G3516H, G3520B, G3520C, G352...
3508, 3508B, 3508C, 3512, 3516, 3516B, 5130, 5230, 776C, 784B, 785, 785B, 789B, 793B, 994, D11N, D11R, G3508, G3508B, G3512, G3512B, G3512E, G3516, G3516B, G3516C, G3516E, G3516H, G3520B, G3520C, G352...
7C3986
PIN-PUMP DRIVE
3508, 3512, 3516, 3606, 3608, 3612, 3616, G3512, G3516
3508, 3512, 3516, 3606, 3608, 3612, 3616, G3512, G3516
2638955
PIN-PISTON
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 789, 789B, 789C, 789D, 793C, 793D, 854G, 992G, 994D, D11N, D11...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 789, 789B, 789C, 789D, 793C, 793D, 854G, 992G, 994D, D11N, D11...
1970560
PIN-PISTON
3508, 3508B, 3508C, 3512, 3512B, 3516, 3516B, 5130B, 5230, 5230B, 776C, 776D, 777, 777D, 784C, 785, 785B, 785C, 789B, 789C, 793C, 793D, 854G, 992G, 994, 994D, D11R, PM3508, PM3512, PM3516, PP3516, SPF...
3508, 3508B, 3508C, 3512, 3512B, 3516, 3516B, 5130B, 5230, 5230B, 776C, 776D, 777, 777D, 784C, 785, 785B, 785C, 789B, 789C, 793C, 793D, 854G, 992G, 994, 994D, D11R, PM3508, PM3512, PM3516, PP3516, SPF...
4W8484
PIN-PISTON
3508, 3512, 3516, 785, G3508, G3512, G3516
3508, 3512, 3516, 785, G3508, G3512, G3516
1388506
PIN-PISTON
3508, 3512, 3516, 785, G3508, G3508B, G3512, G3512B, G3512E, G3516, G3516B, G3516C, G3516E, G3520B, G3520C, G3520E, PMG3516
3508, 3512, 3516, 785, G3508, G3508B, G3512, G3512B, G3512E, G3516, G3516B, G3516C, G3516E, G3520B, G3520C, G3520E, PMG3516
8N8160
PIN-RACK ACTUATOR
3508, 3508C, 3512, 3512B, 3516, PM3512, PM3516
3508, 3508C, 3512, 3512B, 3516, PM3512, PM3516
2F6721
PIN-RACK
3508, 3512, 3516, 3606, 3608, 3612, 3616, 785, D11N, D342, D353C, D379, G3508, G3512, G3516
3508, 3512, 3516, 3606, 3608, 3612, 3616, 785, D11N, D342, D353C, D379, G3508, G3512, G3516
2W1479
PIN-SHAFT
3508, 3512, 3516, 785, G3512, G3516
3508, 3512, 3516, 785, G3512, G3516
7N5368
PIN-RACK
3508, 3508C, 3512, 3516, 3606, 3608, 3612, 3616, 777B, 785, 994, D11N, PM3512, PM3516
3508, 3508C, 3512, 3516, 3606, 3608, 3612, 3616, 777B, 785, 994, D11N, PM3512, PM3516
2F6687
PIN-ROD
3508, 3512, 3516, D342, D353C
3508, 3512, 3516, D342, D353C
9H6673
PIN
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 561D, 583K, 589, 641, 651, 657, 657B, 666, 772, 920, 930, 983, D4E, D4E SR, D5B, D5E, D6D, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 ...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 561D, 583K, 589, 641, 651, 657, 657B, 666, 772, 920, 930, 983, D4E, D4E SR, D5B, D5E, D6D, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 ...