PIN AS 1662372 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     189-0409     Shackle As     2    
B     1U-9200     Lever Puller Hoist     1    
C     180-3032     Repair Stand Set     2    Start By:
Remove the conveyor. Refer to Disassembly and Assembly, "Conveyor - Remove and Install".
Illustration 1 g01069980
Attach Tooling (A), Tooling (B), and a suitable lifting device to the conveyor.
Illustration 2 g01069982
Use the suitable lifting device in order to place the landscape rake onto Tooling (C) .
Remove the suitable lifting device, Tooling (A), and Tooling (B) .
Illustration 3 g01069977
Remove bolts (1), the washers, and the spacers.
Illustration 4 g01069978
Remove block (6) .
Remove screws (3) and the washers.
Remove pivot (2) .
Remove seals (5) and wear ring (4) .
Remove the conveyor chain. Refer to Disassembly and Assembly, "Conveyor Chain - Remove and Install".
Remove the front bar. Refer to Disassembly and Assembly, "Bar (Front) - Remove and Install".
Remove the middle bar. Refer to Disassembly and Assembly, "Bar (Middle) - Remove and Install".
Remove the drive bar. Refer to Disassembly and Assembly, "Bar (Drive) - Remove and Install".
Remove the gerotor motor. Refer to Disassembly and Assembly, "Gerotor Motor - Remove".
Remove the skids. Refer to Disassembly and Assembly, "Skid - Remove and Install".