1709900 PIN Caterpillar parts
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 5110B, 5230, 5230B, 550, 550B, 570, 570B, 580, 580B, 631E, 631G, 633E II, 637E, 637...
Rating:
Alternative (cross code) number:
CA1709900
170-9900
1709900
CA1709900
170-9900
1709900
Weight: 0.01 pounds 0 kg.
Information:
OVERALL LENGTH
14
mm
OUTSIDE PIN DIAMETER
4
mm
END TYPE A
CHAMFER
END TYPE B
CHAMFER
FLAT/VENTED
N
INSIDE DIAMETER
0
ASPHALT PAVER, WHEELED EXCAVATOR,
Compatible equipment models: 1709900:
Number on catalog scheme:
2
For full view, you need register
Information:
Seat Adjustment By Air
Note: Adjust the seat for a new operator or at the beginning of each shift.The operator should be seated against the seat backrest. Adjust the seat so that the operator is allowed full travel of the pedals.
Illustration 1 g00100694
Pull up on the fore/aft lever (1). Move the seat forward or move the seat backward until the desired position is attained. Release the lever in order to lock the seat into position.Pull out on the knob (2) in order to move the seat downward. Push in on the knob (2) in order to move the seat upward. Release the knob in order to lock the seat at the desired position.
Illustration 2 g00879186
The suspension damping lever (3) is a three-position lever with detents. When the detent is in the middle position, the stiffness is medium.Pull back on the suspension damping lever to the stiff position. Push forward on the suspension damping lever to the soft position.Seat Adjustment By Hydraulics
Illustration 3 g00103127
Pull up on the fore/aft lever (1). Move the seat forward or move the seat rearward for the desired position. Release the lever in order to lock the seat in place.Rotate the suspension damping lever (2) upward in order to increase suspension's stiffness. Rotate the suspension damping lever downward in order to decrease the suspension's stiffness. Release the lever in order to lock the seat in place.Push the seat height lever (3) downward in order to move the seat up to the desired position. Pull the seat height lever (3) upward in order to move the seat downward to the desired position. Release the lever in order to lock the seat in place.
Note: Adjust the seat for a new operator or at the beginning of each shift.The operator should be seated against the seat backrest. Adjust the seat so that the operator is allowed full travel of the pedals.
Illustration 1 g00100694
Pull up on the fore/aft lever (1). Move the seat forward or move the seat backward until the desired position is attained. Release the lever in order to lock the seat into position.Pull out on the knob (2) in order to move the seat downward. Push in on the knob (2) in order to move the seat upward. Release the knob in order to lock the seat at the desired position.
Illustration 2 g00879186
The suspension damping lever (3) is a three-position lever with detents. When the detent is in the middle position, the stiffness is medium.Pull back on the suspension damping lever to the stiff position. Push forward on the suspension damping lever to the soft position.Seat Adjustment By Hydraulics
Illustration 3 g00103127
Pull up on the fore/aft lever (1). Move the seat forward or move the seat rearward for the desired position. Release the lever in order to lock the seat in place.Rotate the suspension damping lever (2) upward in order to increase suspension's stiffness. Rotate the suspension damping lever downward in order to decrease the suspension's stiffness. Release the lever in order to lock the seat in place.Push the seat height lever (3) downward in order to move the seat up to the desired position. Pull the seat height lever (3) upward in order to move the seat downward to the desired position. Release the lever in order to lock the seat in place.
Cat SIS web machinery list:
Parts pin Caterpillar catalog:
345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 385C
385B, 385C, 385C L
345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B
350, 365B, 365B II, 365B L
345B II, 345B II MH, 345B L, 365B II, 385B
345B II, 345B II MH, 345B L, 365B II, 385B
345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B II, 385B
325C, 325D L, 330C, 330D L, 345B II, 345C L, 365B, 365B II, 365C, 365C L, 385B, 385C L
365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L
365B, 365B II, 365B L, 365C, 365C L, 374D L, 385B, 385C, 385C L
365C, 385B, 385C, 385C L, 390D, 390D L, 390F L
365C, 385B, 385C, 385C L
631E, 631G, 633E II, 637E, 637G, D9T
1249614
PIN
631E, 633E II, 637E, 651E, 657E
631E, 633E II, 637E, 651E, 657E
1271679
PIN AS
IT38F, IT38G
IT38F, IT38G
1761594
PIN AS
928H, IT28G
928H, IT28G
1226387
PIN AS
928H, IT28G
928H, IT28G
IT28G
8I1568
PIN AS
633E
633E
8I1558
PIN AS
633E
633E
8I2378
PIN AS
633E
633E
1626612
PIN AS
633E
633E
1458450
PIN-CENTER
631E, 631G, 637E, 637G
631E, 631G, 637E, 637G
1864259
PIN
12H, 140H, 14H, 16H, 621G, 623G, 627G, 631E, 631G, 637E, 637G, 725, 730, 735, 735B, 740, 740B, D250E II, D300E II, D350E II, D400E II, W330B
12H, 140H, 14H, 16H, 621G, 623G, 627G, 631E, 631G, 637E, 637G, 725, 730, 735, 735B, 740, 740B, D250E II, D300E II, D350E II, D400E II, W330B