PIN 1743154 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     6V-9120     Socket (1)     1    
( 1 ) Tooling (A) is a 46 mm socket.Start By:
Remove the oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01377622
Illustration 2 g01377623
Remove piston cooling jet (1) .
Remove gaskets (3) and jet (4) from valve (2) .
Use Tooling (A) in order to rotate the engine. Rotating the engine will allow access to the remaining piston cooling jets (1) .Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     6V-9120     Socket (1)     1    
( 1 ) Tooling (A) is a 46 mm socket.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01377623
Illustration 4 g01377622
Install gaskets (3) and jet (4) onto valve (2) .
Install piston cooling jet (1) and tighten valve (2) to 34 5 N m (25 4 lb ft).
Use Tooling (A) in order to rotate the engine. Rotating the engine will allow access to the remaining piston cooling jets (1) .End By: Install the oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Install".