PIN 1782247 - Caterpillar

Illustration 1 g06235893
(1) 8-pin rotator tilt interface connector at boom foot
Illustration 2 g06236130
(2) Implement harness from boom foot to stick nose
(3) Rotator tilt
Illustration 3 g06236255
(4) Rotator tilt quick coupler solenoid 1
(5) Rotator tilt quick coupler solenoid 2
(6) Implement ECM
(7) Rotator tilt TCU
(8) Rotator tilt system
(9) Can D data link
(10) Machine ECM
(11) Machine monitor
(12) Coupler switch
(13) Joystick right hand
(14) Joystick left handThe rotator tilt system is controlled by advanced joysticks (13) and (14) and coupler switch (12).The joystick and coupler switch sends a signal to machine ECM (10). Machine ECM (10) sends the signal to implement ECM (6) and rotator tilt system (8).Machine ECM (10) and rotator tilt TCU (7) communicate with each other using Can D (9). Machine ECM (10) passes needed information to machine monitor (11) using machine J1939 CAN.The signal from coupler switch (12) is processed at machine ECM (10). Implement ECM (6) receives the signal from machine ECM (10) and controls coupler solenoid (5) in rotator tilt system (8). Coupler solenoid (4) in rotator tilt system (8) is controlled by rotator tilt TCU (7). The coupler of rotator tilt system (8) is open if the two coupler solenoids (4) and (5) are energized at the same time.The following menu is available in the monitor:
Rotator tilt position in the "Maintenance" menu, displays the current or stored rotation, tilt, and pitch angles. The operator can set the home position for the bucket auto return function.
The rotator tilt submenu in the "Performance" menu, allows the operator to change the rotator tilt settings.Rotator Tilt System Controls
Illustration 4 g06236256
Left-Hand Console
(12) Coupler switchWhen a rotator tilt system is detected as "INSTALLED", coupler switch (12) on the left-hand console is used to open and close the rotator tilt coupler.
Illustration 5 g06236262
Right-Hand Joystick
(15) Bucket auto return
(16) Rotator tilt toggle
(S1) Rotator tilt - tilt function
(S2) Extra #2
Illustration 6 g06236264
Left-Hand Joystick
(17) Bucket shake
(S1) Rotator tilt - rotate function
(S2) Rotator tilt - grapple function / Extra #1The sliders and buttons on the advanced joysticks are used to tilt and to rotate the rotator tilt system.