1R5875 PIN Caterpillar parts
312, 312B, 312C, 312C L, 313B, 314C, E120B
Rating:
Alternative (cross code) number:
CA1R5875
1R-5875
1R5875
CA1R5875
1R-5875
1R5875
Weight: 0.01 pounds 0 kg.
EXCAVATOR,
Number on catalog scheme:
8
For full view, you need register
Caterpillar parts catalog:
Information:
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue and cause serious injury and possible death. If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.Always use a board or cardboard when checking for a leak.
Personal injury or death can result from machine articulation or movement.Machine frames can move and a person can be crushed.Connect the steering frame lock link between the front and rear frames before working on machine.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
The maximum pressure in the steering system is limited to 31000 750 kPa (4500 110 psi) by the pump control section (pressure and flow compensator valve) of the steering pump.Reference: For the correct procedure to relieve any hydraulic oil pressure that may be in the steering system, refer to the Service Manual module for Testing and Adjusting, "System Pressure - Release" for the machine that is being tested.
Table 1
Required Tools
Part Number Description Qty
1U-5481 Pressure Gauge Group 1
1U-5482 Pressure Adapter Group 1
Position the machine so that the machine is in the STRAIGHT AHEAD position.
Illustration 1 g00853163
Steering frame lock is in the LOCKED position.
Move steering frame lock into the LOCKED position.
Engage the parking brake. Move the transmission direction control switch to the NEUTRAL position.
Illustration 2 g01204900
(1) Steering pump. (2) Pressure tap.
Attach the correct hose assembly from the 1U-5482 Pressure Adapter Group to pressure tap (2). Attach the opposite end of the hose assembly to a 0 to 40000 kPa (0 to 5800 psi) pressure gauge in the 1U-5481 Pressure Gauge Group. Pressure tap (2) is located on the discharge line of steering pump (1). The steering pump is located on the left side of the machine under the access panel behind the cab.
Start the engine. Operate the engine at high idle. The oil is at normal operating temperature when the hydraulic oil temperature gauge is between the first mark and the second mark.
After the oil has reached normal operating temperature, lower the work tool until the work tool is slightly off the ground. Run the engine at high idle. Note: During the following step, do not keep the steering pump at stall condition for more than ten seconds. If necessary, release the STIC steering control lever and wait for 30 seconds before you repeat the step.
Move the STIC steering control lever against the steering frame lock. Continue to move the STIC steering control lever against the steering frame lock in order to obtain a reliable pressure reading.
Record the pressure reading on the
Parts pin Caterpillar catalog:
16G, 16H NA, 215B, 227, 229D, 235C, 235D, 24H, 320B, 322B L, 325, 325 L, 325B L, 330 L, 950B, 963B, 963C, 966F, 970F, 980C, 980F, D5E, D5H, D5H XL, D6E, D6G SR, D6H, D6H II, D6H XL, D6H XR, D6M, D6R, ...
231D, 245D, 320, 320 L, 320B, 322 FM L, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330 L, 330B L
225, 229, 235, 235B, 235C, 235D, 245, 322C, 330C L, 973, 973C, 980C, 980F, 980F II, 988B, 988F, 988F II, E300, E300B
115, 315, 317, 320D, 320D L, 320D LRR, 320D RR, 320D2, 321C, 322B L, 322B LN, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 3...
1206799
PIN
315, 317
315, 317
1206798
PIN
315, 317
315, 317
311, 311B, 312, 312B, 312B L, 312C, 312C L, E110B, E120B
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, E110B, E...
0963780
PIN-CLEVIS
1390, 305.5, 305.5E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 311, 311B, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313...
1390, 305.5, 305.5E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 311, 311B, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313...
0964836
PIN-COTTER
120H, 120M, 12H, 12M, 135H, 140H, 140M, 143H, 14H, 14M, 160H, 160M, 163H, 16H, 16M, 24M, 307, 311, 312, E110B, E120B, E200B, E240C, E300B, E70B, EL240B
120H, 120M, 12H, 12M, 135H, 140H, 140M, 143H, 14H, 14M, 160H, 160M, 163H, 16H, 16M, 24M, 307, 311, 312, E110B, E120B, E200B, E240C, E300B, E70B, EL240B
0950882
PIN-SPRING
115, 308E, 308E CR, 308E SR, 311, 311B, 312, 312B, 312B L, 312C, 312C L, 313B, 314C, 315, 315B, 315B FM L, 315B L, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN...
115, 308E, 308E CR, 308E SR, 311, 311B, 312, 312B, 312B L, 312C, 312C L, 313B, 314C, 315, 315B, 315B FM L, 315B L, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN...
1R5891
PIN
307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 312, 312B, 312C, 312C L, 313B, 314C, E120B
307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 312, 312B, 312C, 312C L, 313B, 314C, E120B