PIN-SPRING 1T0099 - Caterpillar

Illustration 1 g03045456
Table 1
Specification for 211-0560 Camshaft Gp
Item Qty Part Specification Description
1 16 5P-0076 Bolt Torque to 55 7 N m (41 5 lb ft).
- - - Diameter (A) of camshaft bearing journal is 85.88 0.02 mm (3.381 0.001 inch).
2 1 5B-5821 Dowel Extension (B) of dowel is 12.0 0.5 mm (0.47 0.02 inch).
3 2 7N-3218 Thrust Washer Thickness (C) is 8.50 0.05 mm (0.335 0.002 inch).
Width of the groove in the camshaft for thrust washer is 8.75 0.05 mm (0.344 0.002 inch).
Illustration 2 g03045457
211-0562 Camshaft As
Illustration 3 g03045458
211-0564 Camshaft As
Table 2
Item Qty Part Specification Description
4 2 4N-1650 Dowel Extension (D) of dowel is 22.0 0.5 mm (0.87 0.02 inch).
Illustration 4 g03045459
Table 3
Item Qty Part Specification Description
- - - Use the following procedure in order to determine the actual camshaft lobe lift (E):
1. Measure camshaft lobe height (F).
2. Measure the base circle (G).
3. Subtract the base circle (G) from the camshaft lobe height (F). The difference is the actual camshaft lobe lift.
- - - Specified camshaft lobe lift (E) for:
Inlet lobe is 10.002 mm (0.3938 inch).
Exhaust lobe is 9.901 mm (0.3898 inch).