1T0289 PIN Caterpillar parts
3192, 517, 518, 518C, 613, 613B, 613C, 613C II, 7261, 910, 920, 930, 930R, 931B, 936, 936F, 941, 950, 955H, 966C, 966R, D250D, D3B, D4D, D4E, D4H, D4H XL, D4HTSK II, D4HTSK III, G936
Rating:
Alternative (cross code) number:
CA1T0289
1T-0289
1T0289
CA1T0289
1T-0289
1T0289
Weight: 0.01 pounds 0 kg.
Information:
LENGTH
15.75
mm
OUTSIDE PIN DIAMETER
5.56
mm
ARTICULATED TRUCK, WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$2.75
08 Jun 2023
Amazon.com
CTP 1T0289 Dowel Pin for Heavy Equipment
CTP Dowel Pin Only || Sold in each || Easy in-and-out fit
CTP Dowel Pin Only || Sold in each || Easy in-and-out fit
$8.09
16 Jun 2022
US: Florida-Parts-Z
1T0289 - PIN (.312"" Diameter) for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$4.00
26 Jun 2022
US: ProperBuy
CTP 1T0289 Dowel Pin for Heavy Equipment
CTP Dowel Pin Only || Sold in each || Easy in-and-out fit
CTP Dowel Pin Only || Sold in each || Easy in-and-out fit
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 1T0289:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 230-6284 Timing Pin (Camshaft) 1
B 136-4632 Timing Pin (Crankshaft) 1
268-1966 Adapter 1
C 298-5564 T40 Torx Socket 1 Start By:
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install" for the correct procedure.
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure. Note: Care must be taken in order to ensure that the fuel injection pump timing is not lost during the removal of the idler gear. Carefully follow the procedure in order to remove the fuel pump gear.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01994555
Illustration 2 g03414038
Remove plug (2) from the cylinder block and remove O-ring seal (1) from the plug.
Rotate the crankshaft so that number one piston is at top dead center on the compression stroke. Refer to System Operation, Testing and Adjusting, "Finding Top Center Position for No.1 Piston" for the correct procedure.
Install Tooling (B) into Hole (Y) in the cylinder block. Use Tooling (B) in order to lock the crankshaft in the correct position. Note: Do not use excessive force to install Tooling (B). Do not use Tooling (B) to hold the crankshaft during repairs.
Install Tooling (A) into Hole (X) in camshaft gear (3). Use Tooling (A) in order to lock the camshaft in the correct position.
Mark gear (3), gear (4), and gear (5) in order to show alignment. Refer to Illustration 2.
Illustration 3 g03378317
Loosen nuts (7) on all rocker arms (8). Use Tooling (C) in order to loosen adjusters (6) on all rocker arms (8). Unscrew adjusters (6) on all rocker arms (8) until all valves are fully closed. Note: Failure to ensure that ALL adjusters are fully unscrewed can result in contact between the valves and pistons.
Illustration 4 g03414039
Illustration 5 g03414044
Mark plate (9) in order to show orientation. Note: Identification will ensure that the plate can be installed in the original orientation.
Remove bolts (10).
Remove plate (9).
Remove the assembly of idler gear (3).
Remove hub (11) from idler gear (3).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 230-6284 Timing Pin (Camshaft) 1
B 136-4632 Timing Pin (Crankshaft) 1
268-1966 Adapter 1
C 298-5564 T40 Torx Socket 1 Start By:
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install" for the correct procedure.
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure. Note: Care must be taken in order to ensure that the fuel injection pump timing is not lost during the removal of the idler gear. Carefully follow the procedure in order to remove the fuel pump gear.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01994555
Illustration 2 g03414038
Remove plug (2) from the cylinder block and remove O-ring seal (1) from the plug.
Rotate the crankshaft so that number one piston is at top dead center on the compression stroke. Refer to System Operation, Testing and Adjusting, "Finding Top Center Position for No.1 Piston" for the correct procedure.
Install Tooling (B) into Hole (Y) in the cylinder block. Use Tooling (B) in order to lock the crankshaft in the correct position. Note: Do not use excessive force to install Tooling (B). Do not use Tooling (B) to hold the crankshaft during repairs.
Install Tooling (A) into Hole (X) in camshaft gear (3). Use Tooling (A) in order to lock the camshaft in the correct position.
Mark gear (3), gear (4), and gear (5) in order to show alignment. Refer to Illustration 2.
Illustration 3 g03378317
Loosen nuts (7) on all rocker arms (8). Use Tooling (C) in order to loosen adjusters (6) on all rocker arms (8). Unscrew adjusters (6) on all rocker arms (8) until all valves are fully closed. Note: Failure to ensure that ALL adjusters are fully unscrewed can result in contact between the valves and pistons.
Illustration 4 g03414039
Illustration 5 g03414044
Mark plate (9) in order to show orientation. Note: Identification will ensure that the plate can be installed in the original orientation.
Remove bolts (10).
Remove plate (9).
Remove the assembly of idler gear (3).
Remove hub (11) from idler gear (3).
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
966C
966C, 966R
966C, 966R
966C
814, 815, 815B, 966C, 966D, 980B, D25C, D30C, D350C, D35C, D35HP, D400, M325B
814, 815, 966C, 980B
950
950
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
515, 518, 518C, 525
515, 518, 518C, 525, 528, 528B, 530B
518
3H9676
PIN
16, 1693, 657, 769, 955C, 988, D315, D326F, D337F, D343
16, 1693, 657, 769, 955C, 988, D315, D326F, D337F, D343
16, 1693, 594, 657, 769, 955C, 977H, 977K, 977L, 988, CS-323, D315, D326F, D337, D337F, D343, D353C, D364, D375D, D379, D379A, D397D, D9E, D9G, G353D, G379
129, 215, 30, 3192, 44, 46, 561D, 571G, 572G, 583K, 594, 594H, 7211, 7261, 7271, 824B, 977L, 983B, 988, D10R, D4E, D5B, D6D, D6E, D7F, D7G, D7H, D8H, D8K, D9G, D9H
127, 16, 1693, 16G, 183B, 245, 24H, 25, 3406, 508, 518, 528, 54, 561B, 571G, 572G, 583H, 583K, 594, 594H, 619, 621, 621B, 631C, 641, 651, 657, 666, 769, 772, 777, 814B, 815B, 816B, 824, 824C, 826C, 83...
1674, 1693, 630B, 631C, 631D, 631E, 631G, 637D, 637E, 637G, 651E, 657E, 657G, 769, 777, 950, 992, D342, D348, D353C, D8K
4L0694
PIN (SPRING)
D346, D353C, D375D
D346, D353C, D375D
9B9130
PIN
12E, 561B, 651, 657, 834, 955C, 955H, 977D, 977H, 988, D315, D320A, D326F, D330A, D337, D337F, D342, D342C, D343, D353C, D375D, D397D, D8H, D9E, D9G
12E, 561B, 651, 657, 834, 955C, 955H, 977D, 977H, 988, D315, D320A, D326F, D330A, D337, D337F, D342, D342C, D343, D353C, D375D, D397D, D8H, D9E, D9G
7F6633
PIN
D364, D375D, D379A, D379B, D398
D364, D375D, D379A, D379B, D398
2L4367
PIN
D342C, D343, D348, D353C, D379A, D398, D398A, D399
D342C, D343, D348, D353C, D379A, D398, D398A, D399
6B4733
PIN
12E, 594H, 621E, 621F, 623E, 627, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637B, 637D, 637E, 637G, 651, 651E, 657, 657B, 657E, 769C, 772, 772B, 773B, 777, 777B, 785, 824, 955H, 977H, D320A, D326F, D342...
12E, 594H, 621E, 621F, 623E, 627, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637B, 637D, 637E, 637G, 651, 651E, 657, 657B, 657E, 769C, 772, 772B, 773B, 777, 777B, 785, 824, 955H, 977H, D320A, D326F, D342...
594, 594H, D353C, D9E, D9G, D9H, G353D, PM-201, PM-465, PM-565, PM-565B
2B1560
PIN
120M, 12M, 140M, 14M, 160M, 3208, 518, 611, 615C, D342C, D8H, D9E, D9G
120M, 12M, 140M, 14M, 160M, 3208, 518, 611, 615C, D342C, D8H, D9E, D9G