PIN 1V8953 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01064064
Illustration 2 g01023042
Disconnect the harness assembly from engine oil pressure sensor (1) . Cut the cable straps that secure the harness assembly to the engine.
Remove engine oil pressure sensor (1) .
Inspect the condition of the O-ring seal on engine oil pressure sensor (1) . Replace the O-ring seal, if necessary.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01023042
Illustration 4 g01064064
Install engine oil pressure sensor (1) . Tighten the engine oil pressure sensor to a torque of 10 2 N m (89 18 lb in).
Connect the harness assembly to engine oil pressure sensor (1) . Secure the harness assembly to the engine with cable straps.