2017128 PIN AS Caterpillar parts
345B II, 345B L, 365B II, 385B
Rating:
Alternative (cross code) number:
CA2017128
201-7128
2017128
CA2017128
201-7128
2017128
Weight: 105 pounds 47 kg.
Information:
PIN LENGTH
730
mm
PIN OUTER DIAMERTER
99.85
mm
PIN PART NUMBER
2017129
PLATE PART NUMBER
4I5003
LUBE OUTLET
N
MAX. THREAD SIZE
M30X3.5
PIN END TYPE
LEAD TAPER
PIN TRANSV HOLE
N
PLATE FIXING HOLES
Y
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Brembo 09.N255.21 UV Coated vented Front Brake Rotor FORD/FORD (CHANGAN) OE# 2017128
Brembo HIGH CARBON CONTENT: Experience enhanced driving comfort and performance, thanks to high carbon content that minimizes vibration and noise. || EASY AND IMMEDIATE INSTALLATION: All required hardware needed for installation is included in the box. || RESISTS CORROSION: New anti-corrosion technology developed in collaboration with original equipment (OE) manufacturers deliver better fit and longer brake life. || ORIGINAL EQUIPMENT CERTIFIED: Many vehicles come from the factory equipped with Brembo brakes. For all others, Brembo always meets or exceeds the material specs used by the original manufacturer. || BENEFITS OF UV COATING: Brembo’s UV coating technology greatly reduces the negative effects of the environment on rotors. You can count on better corrosion resistance, a clean aesthetic, and an overall reliable performance.
Brembo HIGH CARBON CONTENT: Experience enhanced driving comfort and performance, thanks to high carbon content that minimizes vibration and noise. || EASY AND IMMEDIATE INSTALLATION: All required hardware needed for installation is included in the box. || RESISTS CORROSION: New anti-corrosion technology developed in collaboration with original equipment (OE) manufacturers deliver better fit and longer brake life. || ORIGINAL EQUIPMENT CERTIFIED: Many vehicles come from the factory equipped with Brembo brakes. For all others, Brembo always meets or exceeds the material specs used by the original manufacturer. || BENEFITS OF UV COATING: Brembo’s UV coating technology greatly reduces the negative effects of the environment on rotors. You can count on better corrosion resistance, a clean aesthetic, and an overall reliable performance.
YCQTaoBao Front Brake Rotor 2PC Replaces 2017128, DG9Z1125A Compatible with Fusion 2013 2014 2015 2016 2017 2019 Compatible with Lincoln MKZ 2013
YCQTaoBao Front Brake Rotor Replaces 2017128, DG9Z1125A Compatible with Fusion 2013 2014 2015 2016 2017 2019 Compatible with Lincoln MKZ 2013 || 2 Front Disc Brake Rotor || Important Note: Please use Amazon's vehicle fitment tool first to confirm if the part is correct for your vehicle
YCQTaoBao Front Brake Rotor Replaces 2017128, DG9Z1125A Compatible with Fusion 2013 2014 2015 2016 2017 2019 Compatible with Lincoln MKZ 2013 || 2 Front Disc Brake Rotor || Important Note: Please use Amazon's vehicle fitment tool first to confirm if the part is correct for your vehicle
Brembo 09.N255.21 UV Coated vented Front Brake Rotor FORD/FORD (CHANGAN) OE# 2017128
Brembo HIGH CARBON CONTENT: Experience enhanced driving comfort and performance, thanks to high carbon content that minimizes vibration and noise. || EASY AND IMMEDIATE INSTALLATION: All required hardware needed for installation is included in the box. || RESISTS CORROSION: New anti-corrosion technology developed in collaboration with original equipment (OE) manufacturers deliver better fit and longer brake life. || ORIGINAL EQUIPMENT CERTIFIED: Many vehicles come from the factory equipped with Brembo brakes. For all others, Brembo always meets or exceeds the material specs used by the original manufacturer. || BENEFITS OF UV COATING: Brembo’s UV coating technology greatly reduces the negative effects of the environment on rotors. You can count on better corrosion resistance, a clean aesthetic, and an overall reliable performance.
Brembo HIGH CARBON CONTENT: Experience enhanced driving comfort and performance, thanks to high carbon content that minimizes vibration and noise. || EASY AND IMMEDIATE INSTALLATION: All required hardware needed for installation is included in the box. || RESISTS CORROSION: New anti-corrosion technology developed in collaboration with original equipment (OE) manufacturers deliver better fit and longer brake life. || ORIGINAL EQUIPMENT CERTIFIED: Many vehicles come from the factory equipped with Brembo brakes. For all others, Brembo always meets or exceeds the material specs used by the original manufacturer. || BENEFITS OF UV COATING: Brembo’s UV coating technology greatly reduces the negative effects of the environment on rotors. You can count on better corrosion resistance, a clean aesthetic, and an overall reliable performance.
Number on catalog scheme:
12
For full view, you need register
Information:
Secondary Steering Pump and Motor
Part No: 139-2327
Illustration 1 g00104478
Secondary Steering Pump and Motor (1) Secondary steering motor. (2 ) Inlet. (3) Secondary steering pump. (4) Ground terminal. (5) Positive terminal. (6) Outlet.The motor operates at 24 VDC.Normal operating temperature for the motor is 20°C (70°F).Type: Gear pumpTest the pump with SAE 10W oil. The oil should be 50°C (120°F).Test the motor at full speed (24 VDC): Output ... 32 L/min (8.5 US gpm) Pressure ... 4500 kPa (650 psi)Note: The secondary relief valve is built into the secondary steering pump.Primary and Secondary Steering Oil Pressure Switch
Part No: 3E-6450
Illustration 2 g00102189
Primary and Secondary Steering Oil Pressure Switch (1) Torque for installing the pressure switch ... 75 7 N m (55 5 lb ft)Maximum actuation pressure at -40° to +121°C (-40° to +250°F) ... 1200 kPa (175 psi)Deactuation pressure at -40° to +121°C (-40° to +250°F) ... 700 100 kPa (100 15 psi)Contacts (A) and (C) are normally closed below the deactuation pressure of the pressure switch.Contacts (A) and (B) are normally open below the deactuation pressure of the pressure switch.Secondary Steering Valve
Part No: 141-2597
Illustration 3 g00104585
Secondary Steering Valve Group (1) Cap end. (2) Inlet from secondary steering pump. (3) Inlet from primary steering pump. (4) Secondary steering oil pressure switch port. (5) Primary steering oil pressure switch port. (6) Output to primary steering main control valve. (7) Secondary steering system check valve. (8) 2S-2596 Spring : Length under test force ... 200 mm (7.9 inch) Test force ... 4.23 0.34 N m (3.12 0.25 lb ft) Free length after test ... 33.3 mm (1.311 inch) Outside diameter ... 8.43 mm (0.332 inch) (9) Primary steering system check valve.
Part No: 139-2327
Illustration 1 g00104478
Secondary Steering Pump and Motor (1) Secondary steering motor. (2 ) Inlet. (3) Secondary steering pump. (4) Ground terminal. (5) Positive terminal. (6) Outlet.The motor operates at 24 VDC.Normal operating temperature for the motor is 20°C (70°F).Type: Gear pumpTest the pump with SAE 10W oil. The oil should be 50°C (120°F).Test the motor at full speed (24 VDC): Output ... 32 L/min (8.5 US gpm) Pressure ... 4500 kPa (650 psi)Note: The secondary relief valve is built into the secondary steering pump.Primary and Secondary Steering Oil Pressure Switch
Part No: 3E-6450
Illustration 2 g00102189
Primary and Secondary Steering Oil Pressure Switch (1) Torque for installing the pressure switch ... 75 7 N m (55 5 lb ft)Maximum actuation pressure at -40° to +121°C (-40° to +250°F) ... 1200 kPa (175 psi)Deactuation pressure at -40° to +121°C (-40° to +250°F) ... 700 100 kPa (100 15 psi)Contacts (A) and (C) are normally closed below the deactuation pressure of the pressure switch.Contacts (A) and (B) are normally open below the deactuation pressure of the pressure switch.Secondary Steering Valve
Part No: 141-2597
Illustration 3 g00104585
Secondary Steering Valve Group (1) Cap end. (2) Inlet from secondary steering pump. (3) Inlet from primary steering pump. (4) Secondary steering oil pressure switch port. (5) Primary steering oil pressure switch port. (6) Output to primary steering main control valve. (7) Secondary steering system check valve. (8) 2S-2596 Spring : Length under test force ... 200 mm (7.9 inch) Test force ... 4.23 0.34 N m (3.12 0.25 lb ft) Free length after test ... 33.3 mm (1.311 inch) Outside diameter ... 8.43 mm (0.332 inch) (9) Primary steering system check valve.
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
330, 330 FM L, 330 L, 330B, 330B L, 345B, 345B L, W330B
345B, 345B II, 345B II MH, 345B L, W345B II
345B II, 345B II MH, 345B L, 365B II, 385B
345B II, 345B II MH, 345B L, 365B II, 385B
345B II, 345B L
345B II, 345B L
345B II, 345B L
345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B II, 385B
325C, 325D L, 330C, 330D L, 345B II, 345C L, 365B, 365B II, 365C, 365C L, 385B, 385C L
365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L
365B, 365B II, 365B L, 365C, 365C L, 374D L, 385B, 385C, 385C L
365C, 385B, 385C, 385C L, 390D, 390D L, 390F L
2318888
PIN AS
330C FM, 345B II, 345B II MH, 345B L, 345C
330C FM, 345B II, 345B II MH, 345B L, 345C
1554569
PIN
330C, 330C L, 345B II, 345B L
330C, 330C L, 345B II, 345B L
2895985
PIN AS
336D L, 345B II, 345B L, 345C, 345D L
336D L, 345B II, 345B L, 345C, 345D L
345B II, 345B L
345B II, 345B L
345B II, 345B II MH, 345B L, 365B II, 385B
1598240
PIN AS
345B L
345B L
1622291
PIN
345B II, 345B L
345B II, 345B L
1622292
PIN
330B L, 345B II, 345B L
330B L, 345B II, 345B L
2017138
PIN AS
345B II, 345B L
345B II, 345B L
2017134
PIN AS
345B II, 345B L
345B II, 345B L
2017130
PIN AS
345B II, 345B L, 365B II, 385B
345B II, 345B L, 365B II, 385B