PIN 2044064 - Caterpillar

Location Of New Components. (Left Side Shown.) (1) Plate. (2) Plate. (3) Bolt. (4) Tank. (5) Washer. (6) Plate.Installation Procedure For 793B (1HL149-194) Trucks
Dimensions For Mounting Plates (1, 2, 6) (A) 192.6 3.0 mm (7.58 .12 in). (B) 300.0 2.0 mm (11.81 .08 in). (C) 192.6 3.0 mm (7.58 .12 in). (D) 300.0 2.0 mm (11.81 .08 in). (E) 600.0 2.0 mm (23.62 .08 in). (F) 600.0 2.0 mm (23.62 .08 in). (G) 57.0 2.0 mm (2.24 .08 in). (H) 57.0 2.0 mm (2.24 .08 in).1. Clean and grind the area to remove paint where the new plates assemblies will be welded. Use the tank and illustration to locate mounting positions.2. Locate plate (2) as shown in the illustration and weld across the top of the plate and the frame with a 8.0 mm (.31 in) fillet with 1.5 mm (.06 in) penetration. Do this in two locations.3. Locate plate (1) on top of plate (2) and against the frame as shown in the illustration. Weld the plate (1) to the frame with a 5.0 mm (.20 in) fillet with 1.5 mm (.06 in) penetration on the outside face. Weld plate (1) to plate (2) with a 8.0 mm (.31 in) fillet with 1.5 mm (.06 in) penetration on the outside face. Do this in two locations.4. Locate plate (5) as shown in the illustration and weld across the top of the plate and frame with a 8.0 mm (.31 in) fillet with 1.5 mm (.06 in) penetration. Do this in two locations.5. After the welding procedure is complete, clean and paint new plate assemblies.6. When installing the oil saver tank (4), tighten the bolts (3) to a torque of 40 10 N m (30 7 lb ft).