PIN 2168494 - Caterpillar

General Information
Illustration 1 g00873181
Fuse Panel (1) Diagnostic service tool connector (ET) (2) Fuses (3) Connector for the Control Service ToolDiagnostic service tool connector (1) and the connector for the 4C-8195 Control Service Tool (3) are located behind the access cover in the right rear panel of the cab.
Illustration 2 g00873143
Top View of the Cab (4) Power Train ECM (5) Implement ECMImplement electronic control module (5) and Power Train electronic control module (4) are located inside the cab at the right rear side. The power train ECM is installed behind a cover panel.The Electrical System Schematic, Parts Manual, and Operation and Maintenance Manual for the machine that is being serviced should be used to locate electrical components and connectors.ReferenceFor more information on the electrical system and the components, refer to the Service Manual module Schematic.ReferenceFor more information on the operation of the electrical components of the machine, refer to the appropriate Parts Manual for the machine that is being serviced.Harness Connectors
Illustration 3 g01164719
(6) Connector J1. (7) Connector J2.
Illustration 4 g01164895
(8) Screw.In order to remove the harness from the Power Train ECM, use screw (3) in the center of the harness connector.