PIN AS 2354810 - Caterpillar

Illustration 1 g02785336
Illustration 2 g02785337
Table 1
Specification for 269-8133 Transmission Planetary Gp, and 353-5999 Transmission Planetary Gp
Item Qty Part Specification Description
1 Thickness of three new friction discs and two new plates for the No.1 clutch is 29.47 0.40 mm (1.160 0.016 inch):
3 206-4806 Friction Disc Thickness of one new friction disc is 5.59 0.08 mm (0.220 0.003 inch).
2 297-8403 Plate Thickness of one new plate is 6.35 0.08 mm (0.250 0.003 inch).
2 Thickness of two new friction discs and one new plate for the No.2 clutch is 17.91 0.24 mm (0.705 0.010 inch):
2 289-3614 Friction Disc Thickness of one new friction disc is 5.59 0.08 mm (0.220 0.003 inch).
1 9N-4333 Plate Thickness of one new plate is 6.73 0.08 mm (0.265 0.003 inch).
3 Thickness of four new friction discs and three new plates for the No.3 clutch is 42.55 0.56 mm (1.675 0.022 inch):
4 289-3614 Friction Disc Thickness of one new friction disc is 5.59 0.08 mm (0.220 0.003 inch).
3 9N-4333 Plate Thickness of one new plate is 6.73 0.08 mm (0.265 0.003 inch).
4 Thickness of five new friction discs and four new plates for the No.4 clutch is 54.87 0.72 mm (2.160 0.028 inch):
5 173-3270 Friction Disc Thickness of one new friction disc is 5.59 0.08 mm (0.220 0.003 inch).
4 9U-9829 Plate Thickness of one new plate is 6.73 0.08 mm (0.265 0.003 inch).
5 Thickness of three new friction discs and two new plates for the No.5 clutch is 30.23 0.40 mm (1.190 0.016 inch):
3 289-3614 Friction Disc Thickness of one new friction disc is 5.59 0.08 mm (0.220 0.003 inch).
2 9N-4333 Plate Thickness of one new plate is 6.73 0.08 mm (0.265 0.003 inch).
6 Thickness of five new friction discs and four new plates for the No.6 clutch is 53.35 0.72 mm (2.100 0.028 inch):
5 173-3272 Friction Disc Thickness of one new friction disc is 5.59 0.08 mm (0.220 0.003 inch).
1 140-7160 Plate Thickness of one new plate is 6.35 0.08 mm (0.250 0.003 inch).
3 9U-9844 Plate Thickness of one new plate is 6.35 0.08 mm (0.250 0.003 inch).
7 1 123-2003 O-Ring Seal Lubricate bore lightly with lubricant that is being sealed.
8 2 6Y-2983 Seal Ring Lubricate bore lightly with lubricant that is being sealed.
9 16 2B-0947 Bolt Torque to 115 7 N m (85 5 lb ft).
10 1 9M-9729 O-Ring Seal Lubricate bore lightly with lubricant that is being sealed.
11 1 297-5156 Shim Pack As required, use the shim pack between the flange and retainer to provide a shim thickness of 0.03 to 0.08 mm (0.001 to 0.003 inch) less than the gap measured before you tighten the bolts:
297-5156 Shim