PIN-BEARING 2430915 - Caterpillar

Table 2
Contact Description J2(1)
No.(2) Function Type
1 ATT Stem Extend EPRV/REPRV for TCS Output
2 ATT Line 1 REPRV Output
3 ATT Stem 2 Retract EPRV/REPRV for TCS Output
4 ATT Stem 2 Extend EPRV/REPRV for TCS Output
5 Bypass Cut 1 EPRV for TCS Output
6 CTWT Removal Switch for 345E Output
7 ATT Stem Retract EPRV for TCS Output
8 PS Pressure EPRV Output
9 Boom Regen REPRV Output
10 (Stick Regen REPRV for OPT - 1) Output
11 (Boom 2 Up REPRV for OPT - 0) Output
12 (Stick 2 In REPRV for OPT - 1) Output
13 ATT Stem 1 Retract EPRV/REPRV for TCS Output
15 CAN 3 Shield Ground
16 CDL - (Speed Sensor - Spare) Output
18 (Stick 2 Out REPRV for OPT - 0) Output
19 PRV Return Ground
20 PRV Return Ground
21 PRV Return Ground
22 PRV Return Ground
23 ATT Line 2 REPRV Output
25 CDL+ (Speed Sensor + Spare) Input/Output
26 CAN 4 Shield Ground
27 Hydraulic Lock Cancel Switch Input
28 Swing Priority Solenoid for GEN 1 Output
29 Boom Up Limit EPRV for Grade Control Output
30 ATT Stem 4 Extend EPRV for TCS Output
31 ATT Stem 3 Extend EPRV for TCS Output
32 Bucket In Limit EPRV for Grade Control Output
33 Bypass Cut 2 EPRV for TCS Output
34 ATT Stem 3 Retract EPRV for TCS Output
35 PRV Return Ground
36 CDL/(CAN 4) + Input/Output
37 CDL/(CAN 4) - Input/Output
38 Bucket Out Limit EPRV for Crane/Grade Control Output
39 Boom Down REPRV for TCS/Grade Control/SMTBM (S1) Output
40 Stick In (R) EPRV for TCS/Grade Control Output
41 Stick Out REPRV for TCS/Crane/Grade Control Output
42 Stick Out Avoidance EPRV for Grade Control Output
43 NFC 2 Limit EPRV Output
44 Generator F. C. Cut for MG/MH/FM Output
45 CAN 3 + Input/Output
46 CAN 3 - Input/Output
47 CAN 2 + (J1939) Input/Output
48 CAN 2 - (J1939) Input/Output
49 CAN 2 Shield Ground
50 CAN 1 + (HEDC Local CAN) Input/Output
51 CAN 1 - (HEDC Local CAN) Input/Output
53 NFC 2 Limit EPRV Output
(1) The ECM responds to an active input only when all the necessary conditions are satisfied.
(2) The connector contacts that are not listed are not used.