PIN AS-CARTRIDGE 2513280 - Caterpillar

Ensure that all safety information, warnings and instructions are read and understood before any operation or any maintenance procedures are performed.The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Batteries - Replace
Engine - Clean
Engine Air Cleaner Element (Single Element) - Clean/Replace
Fan Drive Bearing - Lubricate
Fuel System - Prime
Maintenance Recommendations
Radiator - Clean
Daily
Cooling System Coolant Level - Check
Driven Equipment - Inspect/Replace/Lubricate
Engine Air Cleaner Differential Pressure - Check
Engine Oil Filter Differential Pressure - Check
Engine Oil Level - Check
Fuel System Fuel Filter Differential Pressure - Check
Fuel System Primary Filter/Water Separator - Drain
Instrument Panel - Inspect
Initial 250 Service Hours (or at first oil change)
Engine Valve Lash - Inspect/Adjust
Fuel Injector - Inspect/Adjust
Every 250 Service Hours
Belts - Inspect/Adjust/Replace
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Drive Shaft Universal Joints - Lubricate
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Hoses and Clamps - Inspect/Replace
Power End Oil and Filter - Change
Every 1000 Service Hours
Cooling System Coolant Analysis (Level II) - Obtain
Engine Crankcase Breather - Clean
Engine Protective Devices - Check
Every 1000 Service Hours or 1 Year
Fuel Filter (Engine Coolant Heater) - Replace
Every 2000 Service Hours
Crankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine Mounts - Check
Engine Speed/Timing Sensor - Clean/Inspect
Engine Valve Lash - Inspect/Adjust
Fuel Injector - Inspect/Adjust
Turbocharger - Inspect
Every 3000 Service Hours or 3 Years
Cooling System Coolant (DEAC) - Change
Cooling System Coolant Extender (ELC) - Add
Every 4000 Service Hours
Overhaul (Top End)
Overhaul Considerations
Every 6000 Service Hours or 6 Years
Alternator - Inspect
Cooling System Coolant (ELC) - Change
Cooling System Water Temperature Regulator - Replace
Water Pump - Inspect
Every 8000 Service Hours
Overhaul (Major)
Overhaul Considerations