PIN AS 2603030 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
2 6V8397 SEAL-O-RING-ORFS
1 7K1181 STRAP-CABLE
1 4545316 HOSE AS
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
If the existing tube fails, replace the tube with a new 454-5316 Hose Assembly. Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-4000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
1. Open the left engine door compartment.
2. Cut the strap from the electrical connector and move up the ladder clip with the connector. Retain the same ladder clip and connector orientation as before. Strap the connector with a 7K-1181 Cable Strap. Refer to Image1.1.1.
Image1.1.1
3. Remove the 290-5606 Oil Tube by using the dealer tool 5P-0327 Crowfoot Socket 13/16. Refer to Image1.2.1.
Image1.2.1
4. Replace the two 6V-8397 O-Ring Seals on each side by new ones. Lightly lubricate O-ring seal with engine oil.
5. Assemble the new 454-5316 Hose Assembly. Tighten the hose by using the dealer tool 5P-0327 Crowfoot Socket 13/16 to a specified torque of 45 +/- 5 N.m.
6. Re-orient the adapter assembly in order to avoid interference with the connector and the pulley. Refer to Image1.3.1.
Image1.3.1
7. Clean the machine.
8. Start the engine and warm-up.
9. Check and ensure that there are no leaks on the hose assembly and adapter assembly.
10. Check the engine oil level. Add oil, if necessary.