PIN 2649726 - Caterpillar

Illustration 5 g00576731
Install bolt (39), the washer, and the clip that holds hose assembly (40) to radiator (5) .
Illustration 6 g00576729
Install two bolts (37), the washers, and the clips that hold hose assembly (38) to radiator (5) .
Illustration 7 g00576728
Install two bolts (35) and the washers that hold cap (36) to support (34) (not shown).
Illustration 8 g00576727
Install two bolts (31) and the washers that hold cap (32) to support (33) (not shown).
Illustration 9 g00576726
Install gasket (30) (not shown) to radiator (5). Install four bolts (29) that hold radiator elbow (28) to radiator (5) .
Illustration 10 g00576725
Install gasket (26) (not shown) to radiator (5). Install four bolts (25) that hold radiator elbow (27) to radiator (5) .
Illustration 11 g00576724
Install gasket (23) (not shown) to radiator (5). Install four bolts (22) that hold radiator elbow (24) to radiator (5) .
Illustration 12 g00576723
Install gasket (20) (not shown) to radiator (5). Install four bolts (19) that hold radiator elbow (21) to radiator (5) .
Illustration 13 g00576722
Install gasket (17) (not shown) to radiator (5). Install four bolts (16) that hold radiator elbow (18) to radiator (5) .
Illustration 14 g00576721
Position a suitable lifting sling (not shown) around one of the blades of fan spider assembly (14). Secure the lifting sling to a hoist. Install eight bolts (15) and the washers that hold fan spider assembly (14) to adapter (13). The weight of fan spider assembly (14) is 102 kg (224 lb).
Illustration 15 g00576720
Position guard assembly (7), as shown. Install three bolts (12), the nuts, and the washers that hold guard assembly (7) to guard assembly (11) .
Illustration 16 g00576719
Install five bolts (9) and the washers that hold guard assembly (7) to shield assembly (10) .
Illustration 17 g00576718
Install three bolts (6), the nuts, and the washers that hold guard assembly (7) to guard assembly (8) .
Illustration 18 g00576717
Use two people to position refrigerant condenser (3) to radiator (5), as shown. Install eight bolts (1) and the washers that hold refrigerant condenser (3) to radiator (5). Install five bolts (2), the washers, and the clips that hold two hose assemblies (4) to radiator (5) .
Refill the radiator with coolant. Refer to Operation and Maintenance, "Cooling System Coolant (ELC) - Change".
Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities" for the correct refill capacity.End By: Install the cowling. Refer to Disassembly and Assembly, "Cowling - Install".