2860185 PIN-PISTON Caterpillar parts
C12
Rating:
Alternative (cross code) number:
CA2860185
286-0185
2860185
CA2860185
286-0185
2860185
Weight: 2 pounds 1 kg.
Information:
OVERALL LENGTH
92
mm
OUTSIDE PIN DIAMETER
53.149
mm
END TYPE A
CHAMFER
END TYPE B
CHAMFER
FLAT/VENTED
N
INSIDE DIAMETER
23
MARINE ENGINE,
Compatible equipment models: 2860185:
Number on catalog scheme:
9
For full view, you need register
Information:
diagnostic code is recorded when the ARC reads the current in the circuit (wire 454-GN-16) of the retarder indicator lamp as above normal. As a result of this condition, the retarder indicator lamp will not illuminate.
CHECK THE INDICATOR LAMP.
Wire 454-GN-16 should be disconnected from the socket of the retarder indicator lamp at the retarder indicator lamp.Expected Result: The CID 0712 FMI 06 diagnostic code is present.Results:
OK: The CID 0712 FMI 06 is present. The retarding indicator lamp is not causing the diagnostic code. Proceed to Step 2.
NO: The CID 0712 FMI 06 is NO longer present. The indicator lamp is faulty or the socket of the indicator lamp is faulty. Replace the retarding indicator lamp. STOP. Note: The correct resistance for an indicator lamp is greater than 10 ohms for the purposes of this procedure.
CHECK THE HARNESS.
Turn the disconnect switch to the OFF position.
Wire 454-GN-16 remains disconnected from the retarding indicator lamp.
Disconnect the machine harness from the ARC.
Measure the resistance between connector A-A5 (wire 454-GN-16) and frame ground at the machine harness connector for the ARC.Expected Result: The resistance is greater than 5000 ohms.Results:
OK: The resistance is greater than 5000 ohms. The harness resistance is correct. Proceed to Step 3.
NO: The resistance is less than 5000 ohms. The harness is faulty. Repair the machine harness or replace the machine harness. STOP.
CHECK THE ARC.
Remove contact A-A5 from the machine harness connector for the ARC.
Reconnect the harness connector to the ARC.
Turn the disconnect switch and the key start switches to the ON position.
Check the status of the diagnostic code. The diagnostic code is active or the diagnostic code is NOT active.Expected Result: The CID 0712 FMI 06 diagnostic code is active.Results:
OK: The CID 0712 FMI 06 diagnostic code remains active. The ARC is faulty. Replace the ARC. See Testing And Adjusting, "ARC - Replace". STOP.
NO: The CID 0712 FMI 06 diagnostic code is NOT active. The ARC is not causing the diagnostic code. The diagnostic code is intermittent. The probable cause of the diagnostic code is a poor electrical connection at the harness connectors or a damaged harness. Check the harness for damage. Clean the harness connectors if it is necessary. STOP.
CHECK THE INDICATOR LAMP.
Wire 454-GN-16 should be disconnected from the socket of the retarder indicator lamp at the retarder indicator lamp.Expected Result: The CID 0712 FMI 06 diagnostic code is present.Results:
OK: The CID 0712 FMI 06 is present. The retarding indicator lamp is not causing the diagnostic code. Proceed to Step 2.
NO: The CID 0712 FMI 06 is NO longer present. The indicator lamp is faulty or the socket of the indicator lamp is faulty. Replace the retarding indicator lamp. STOP. Note: The correct resistance for an indicator lamp is greater than 10 ohms for the purposes of this procedure.
CHECK THE HARNESS.
Turn the disconnect switch to the OFF position.
Wire 454-GN-16 remains disconnected from the retarding indicator lamp.
Disconnect the machine harness from the ARC.
Measure the resistance between connector A-A5 (wire 454-GN-16) and frame ground at the machine harness connector for the ARC.Expected Result: The resistance is greater than 5000 ohms.Results:
OK: The resistance is greater than 5000 ohms. The harness resistance is correct. Proceed to Step 3.
NO: The resistance is less than 5000 ohms. The harness is faulty. Repair the machine harness or replace the machine harness. STOP.
CHECK THE ARC.
Remove contact A-A5 from the machine harness connector for the ARC.
Reconnect the harness connector to the ARC.
Turn the disconnect switch and the key start switches to the ON position.
Check the status of the diagnostic code. The diagnostic code is active or the diagnostic code is NOT active.Expected Result: The CID 0712 FMI 06 diagnostic code is active.Results:
OK: The CID 0712 FMI 06 diagnostic code remains active. The ARC is faulty. Replace the ARC. See Testing And Adjusting, "ARC - Replace". STOP.
NO: The CID 0712 FMI 06 diagnostic code is NOT active. The ARC is not causing the diagnostic code. The diagnostic code is intermittent. The probable cause of the diagnostic code is a poor electrical connection at the harness connectors or a damaged harness. Check the harness for damage. Clean the harness connectors if it is necessary. STOP.
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
130G, 140G, 14G, 205B, 206B, 211B, 212B, 214, 214B, 215, 215B, 215D, 224B, 225, 225D, 227, 229, 229D, 231D, 235, 235C, 245, 245B, 245D, 30/30, 307, 311, 3114, 3116, 312, 3126, 3126B, 315, 317, 3176B, ...
127, 129, 12E, 173B, 183B, 215, 225, 235, 25, 30/30, 3306, 3306B, 336D, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 3508, 3508B, 3512, 3512B, 3512C, 3516, 35...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
216, 216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247B, 247B3, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267B, 268B, 272C, 272D, 272D X...
140H, 143H, 14H, 14M, 160H, 163H, 16G, 16H, 16H NA, 16M, 24M, 3176C, 3196, 3406B, 3406C, 3406E, 3412D, 3456, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D L, 365B, 365B II, 365B L, 36...
16H, 3196, 365B, 365B II, 365B L, 730, 85D, 85E, 95E, 972G II, C-12, C12, MTC835, SBF214, SUF557
3126, 3126B, 3196, 3406E, 3412E, 3512C, 3516C, 657E, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 854K, 992K, C-12, C-15, C-9, C11, C12, C13, C15, C175-16, C175-20, C...
2715604
PIN-CONNECTOR
246C, 256C, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 299D, 299D XHP, 3126B, 3176C, 3196, 3406E, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B, ...
246C, 256C, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 299D, 299D XHP, 3126B, 3176C, 3196, 3406E, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B, ...
3176B, 3176C, 3196, 3406B, 3406E, 3412E, C-12, C-15, C12, C15, C18, C30, C32
3512B, 3512C, 3516B, 3516C, 785D, 789C, 789D, 793C, 793D, 797, 797B, 994F, 994H, G3516H, SPF343C, TH48-E80, TH55-E70, XQC1200, XQC1600
120M, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, 301.4C, 301.5, 301.6C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.5, 302.5C, 302.7D, 303.5C, 303.5D,...
2308154
PIN-PISTON
3516B
3516B
1808570
PIN
3608
3608
1W0605
PIN-HOUSING SIDE
3606, 3608, C280-6, C280-8, G3606, G3606B, G3608, G3612, G3616
3606, 3608, C280-6, C280-8, G3606, G3606B, G3608, G3612, G3616
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3606, G3606B, G3608
12M, 140G, 140K, 140K 2, 140M, 160K, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 525C, 535C, 545C, 573, 584, 815B, 950H, 962H, AP-1055D, BG-2455D, BG-260D, C7, C9.3, I...
950G, 950H, 950K, 962G, 962H, 962K, 966G, 966H, 972G, 972H, 980G II, 980H, C4.4, R1700G, R2900G, R3000H
3E5468
PIN-CONNECTOR
3508B, C280-16
3508B, C280-16
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 24M, 336F L, 349F L, 374F L, 390F L, 525D, 535D, 545D, 555D, 572R II, 621H, 62...
3306B, 3406C, 3406E, 3412C, C1.5, C2.2, C3.3, C4.4, C6.6