PIN (Part of 2N4724 Assem.) 2N0147 - Caterpillar

Engine
Table 1
794 AC Caterpillar Diesel Engine
Model C175
Type Turbo Charged
Direct Injection
SCAC Aftercooled
Cylinders 16 Dimensions
Illustration 1 g03664373
All dimensions are approximate. Dimensions will vary depending on the configuration and the options.
(A) Overall Width 909.3 cm (29 ft 10 inch)
(B) Overall Tire Width 873.8 cm (28 ft 8 inch)
(C) Overall Height (body down and empty) 781.6 cm (25 ft 6 inch)
(D) Overall Length 1546 cm (50 ft 7 inch)
(E) Loading Height (body empty) 671.2 cm (22 ft 2 inch)
(F) Overall Height (body raised) 1460.5 cm (47 ft 11 inch)
(G) Wheel Base 665.5 cm (21 ft 10 inch)Weights
The target gross machine operating weight is listed under "Application/Configuration Restrictions" (see below).The empty machine weight of the 794 AC will depend on the configuration of the machine. Weigh the empty machine to get an accurate weight. If a suitable scale is not available, contact your local Cat dealer for an approximate weight of the machine, as equipped when shipped from the factory. This weight will not include extra equipment or options that have been installed on the machine after leaving the factory.The target payload depends on the machine configuration. To calculate the target payload, subtract empty machine weight from the target gross machine operating weight.The Caterpillar payload overload policy, referred to as the 10/10/20 Overload Policy, states that no more than 10% of payloads may exceed 110% of the target payload, and no single payload shall ever exceed 120% of the maximum target payload.If this machine has a "CE" plate that is required for the European Union, the weight on the "CE" plate is based on the following:
Empty machine weight with a body and high impact liner
Full tank of fuel
75 kg (165 lb) operatorIntended Use
The 794 AC Off-Highway Truck is an earthmoving machine. The 794 AC is classified as a dumper as described in ISO 6165:2012. This machine is a self-propelled wheeled machine with a rigid frame and wheel steering. This dumper has an open body that is intended for the following applications: transporting loose material and dumping loose materialApplication/Configuration Restrictions
The 794 AC Off-Highway Truck cab structure is ROPS certified to ISO 3471:1994 up to 31470 kg (69379 lb) as a rigid frame dumper ROPS only option. This number excludes dumper body weight. This number also excludes carryback debris weight.Target Gross Machine Operating Weight for Standard Wheel Stations
The Target Gross Machine Operating Weight (including payload) for the 794 AC Off-Highway Truck equipped with standard wheel stations is 521631 kg (1150000 lb). The braking systems and the steering systems in the 794 AC Off-Highway Truck are in compliance with ISO standards when tested to Caterpillar Global Mining Division's 10/10/20 Overload policy.General Operating Restrictions
Use only in a non-explosive gas environment.
Table 2
794 AC Operating Restrictions Grade
Parking Brake Holding Capability(1) 15%
Maximum Side Grade Operation (Except Dumping/Spreading)(2) 15%
Maximum Side Grade for Dumping/Spreading(3) 0%
Maximum Negative Grade (uphill) for Dumping/Spreading(4) 0%
(1) The listed restriction assumes that the brake components are within working specifications, the machine mass is at maximum allowable, a graded ground surface, and a dry, firm underfoot. The machine operator is responsible