3088947 PIN AS Caterpillar parts
345D, 345D L, 345D L VG, 349D, 349D L
Rating:
Alternative (cross code) number:
CA3088947
308-8947
3088947
CA3088947
308-8947
3088947
Weight: 325 pounds 147 kg.
EXCAVATOR,
Number on catalog scheme:
12
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the tire and rim. Refer to Disassembly and Assembly Manual, "Tire and Rim - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.Note: This procedure can be performed on the machine.
Illustration 1 g01469487
Remove plug (1) from cover (3). Drain the oil into a suitable container.
Remove two screws (2) from cover (3).
Remove carrier (3).
Start By:
Remove the tire and rim. Refer to Disassembly and Assembly Manual, "Tire and Rim - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.Note: This procedure can be performed on the machine.
Illustration 1 g01469487
Remove plug (1) from cover (3). Drain the oil into a suitable container.
Remove two screws (2) from cover (3).
Remove carrier (3).
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
324D, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L,...
324D, 329D LN, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 34...
324D, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, ...
345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385C, G107B, PIN GRAB
345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385C, PIN GRAB
345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, W345C MH
345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 385C
345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 385C
329D L, 345C, 345C L, 345D L
345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B
345B, 345B II, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, W345C MH
345B II, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, W345C MH
3274669
PIN
345D, 345D L, 349D, 349D L, 349E L, 349E L VG, 349F L
345D, 345D L, 349D, 349D L, 349E L, 349E L VG, 349F L
3262469
PIN
345D, 345D L, 349D, 349D L, 349E L, 349E L VG, 349F L
345D, 345D L, 349D, 349D L, 349E L, 349E L VG, 349F L
3262468
PIN
345D, 345D L, 349D, 349D L, 349E L, 349E L VG, 349F L
345D, 345D L, 349D, 349D L, 349E L, 349E L VG, 349F L
2572850
PIN AS
330D L, M330D
330D L, M330D
2718855
PIN AS
M330D
M330D
2804465
PIN AS
M330D
M330D
3545652
PIN-SOLID
336E, 336E L, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
336E, 336E L, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
3496118
PIN
336E, 336E L, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
336E, 336E L, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
3043769
PIN
345D L
345D L
3043767
PIN
336E, 336E L, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
336E, 336E L, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
3043766
PIN
345D L
345D L
3088981
PIN AS
345D, 345D L, 345D L VG, 349D, 349D L
345D, 345D L, 345D L VG, 349D, 349D L