3111298 PIN AS-CARTRIDGE Caterpillar parts
D8N, D8R, D8R II, D8T, D9R, D9T
Rating:
Alternative (cross code) number:
CA3111298
311-1298
3111298
CA3111298
311-1298
3111298
Weight: 12 pounds 5 kg.
TRACK-TYPE TRACTOR,
This part in 4 request:
Show.
This information for suppliers only!
2024-08-12
2023-10-30
2023-01-30
2021-05-18
Information:
These refill capacities reflect the crankcase capacity plus filter. Auxiliary oil filter systems will require additional oil. For all auxiliary oil filter system information consult the OEM or auxiliary oil filter system manufacturer.The Total Cooling System capacity will vary, depending on the radiator size and capacity provided by the OEM manufacturer. In order to properly maintain the cooling system, Total Cooling System capacity must be known. The chart is left blank and should be filled in by the customer to determine the Total Cooling System Capacity for his engine and application.Refill Capacities
3161 Governor Oil Sump
1.8 liter (2 U.S. quart) of engine oil. DO NOT use multi-viscosity oils in the governor. These oils are incompatible and governor damage may result.Total System Cooling Capacity
Total system cooling capacity will vary with each installation. In order to properly service the cooling system, total cooling system capacity must be determined. Total system cooling capacity will consist of engine cooling capacity, radiator capacity (if equipped), and external system capacity. Use the information in the Refill Capacities Chart to fill in the blanks of the chart for engine and radiator (if equipped). Next, calculate the external system capacity, which consists of external piping, heat exchangers, keel coolers, and all other external system components. Enter this information in the chart. After calculating total system capacity, fill the cooling system with a premixed cooling solution of Caterpillar Low Silicate Antifreeze or equivalent, acceptable water, and corrosion inhibitor. The freeze protection of the solution should equal or exceed the system protection requirements. Caterpillar Low Silicate Antifreeze contains the necessary precharge of coolant conditioner. If any other type of ethelyne glycol antifreeze is used, coolant conditioner will have to be added to the cooling system.Cooling System Conditioner
Supplemental Coolant Additive is used for standard type antifreeze only. DO NOT mix standard type anti-freeze with Long Life Coolant. Mixing the two coolants will reduce the effectiveness of the coolant to cool the engine.
To protect your investment in your Caterpillar engine, add liquid cooling conditioner on a scheduled basis at the established Every 250 Service Hour maintenance interval. Cooling system conditioner should be added at initial fill and when the system is drained and cleaned only if an antifreeze other than Caterpillar Low Silicate Antifreeze is used. By maintaining a three to six percent concentration of cooling system conditioner in the cooling system, the possibility of cylinder wall pitting will be minimized, lowering the overall cost of owning and operating your engine.Fill in the chart below to determine the amount of liquid coolant conditioner required to maintain the Total Cooling System Capacity. Use the Total Cooling System Capacity information and calculate the required Coolant Conditioner required. The chart contains three different units of measure for your convenience.
3161 Governor Oil Sump
1.8 liter (2 U.S. quart) of engine oil. DO NOT use multi-viscosity oils in the governor. These oils are incompatible and governor damage may result.Total System Cooling Capacity
Total system cooling capacity will vary with each installation. In order to properly service the cooling system, total cooling system capacity must be determined. Total system cooling capacity will consist of engine cooling capacity, radiator capacity (if equipped), and external system capacity. Use the information in the Refill Capacities Chart to fill in the blanks of the chart for engine and radiator (if equipped). Next, calculate the external system capacity, which consists of external piping, heat exchangers, keel coolers, and all other external system components. Enter this information in the chart. After calculating total system capacity, fill the cooling system with a premixed cooling solution of Caterpillar Low Silicate Antifreeze or equivalent, acceptable water, and corrosion inhibitor. The freeze protection of the solution should equal or exceed the system protection requirements. Caterpillar Low Silicate Antifreeze contains the necessary precharge of coolant conditioner. If any other type of ethelyne glycol antifreeze is used, coolant conditioner will have to be added to the cooling system.Cooling System Conditioner
Supplemental Coolant Additive is used for standard type antifreeze only. DO NOT mix standard type anti-freeze with Long Life Coolant. Mixing the two coolants will reduce the effectiveness of the coolant to cool the engine.
To protect your investment in your Caterpillar engine, add liquid cooling conditioner on a scheduled basis at the established Every 250 Service Hour maintenance interval. Cooling system conditioner should be added at initial fill and when the system is drained and cleaned only if an antifreeze other than Caterpillar Low Silicate Antifreeze is used. By maintaining a three to six percent concentration of cooling system conditioner in the cooling system, the possibility of cylinder wall pitting will be minimized, lowering the overall cost of owning and operating your engine.Fill in the chart below to determine the amount of liquid coolant conditioner required to maintain the Total Cooling System Capacity. Use the Total Cooling System Capacity information and calculate the required Coolant Conditioner required. The chart contains three different units of measure for your convenience.
Caterpillar SIS machinery equipment:
Caterpillar SIS
D8N Track-Type Tractor 7TK00001-UP (MACHINE) »
311-1298
PIN AS-CARTRIDGE
D9R Track-Type Tractor Power Shift 8BL00001-00829 (MACHINE) POWERED BY 3408 Engine »
311-1298
PIN AS-CARTRIDGE
D9R Track-Type Tractor Differential Steering 7TL00001-00556 (MACHINE) POWERED BY 3408 Engine »
311-1298
PIN AS-CARTRIDGE
D8R Track-Type Tractor 7XM00001-UP (MACHINE) POWERED BY 3406 Engine »
311-1298
PIN AS-CARTRIDGE
D9R Track-Type Tractor Power Shift 8BL00830-01052 (MACHINE) POWERED BY 3408 Engine »
311-1298
PIN AS-CARTRIDGE
D9R Track-Type Tractor Differential Steering 7TL00557-00851 (MACHINE) POWERED BY 3408 Engine »
311-1298
PIN AS-CARTRIDGE
D8R TRACK-TYPE TRACTOR 9EM00001-UP (MACHINE) POWERED BY 3406C Engine »
311-1298
PIN AS-CARTRIDGE
D9R Track-Type Tractor Power Shift 8BL01053-UP (MACHINE) POWERED BY 3408 Engine »
311-1298
PIN AS-CARTRIDGE
D9R Track-Type Tractor Differential Steering 7TL00852-UP (MACHINE) POWERED BY 3408 Engine »
311-1298
PIN AS-CARTRIDGE
D8R Series II Track-Type Tractor 6YZ00001-UP (MACHINE) POWERED BY 3406E Engine »
311-1298
PIN AS-CARTRIDGE
D9R Track-Type Tractor Differential Steering ABK00001-UP (MACHINE) POWERED BY 3408 Engine »
311-1298
PIN AS-CARTRIDGE
D9R Track-Type Tractor Power Shift ACL00001-UP (MACHINE) POWERED BY 3408 Engine »
311-1298
PIN AS-CARTRIDGE
D8R TRACK-TYPE TRACTOR Differential Steering AKA00001-UP (MACHINE) POWERED BY 3406E Engine »
311-1298
PIN AS-CARTRIDGE
D9R TRACK-TYPE TRACTOR JJB00001-UP (MACHINE) POWERED BY 3408C Engine »
311-1298
PIN AS-CARTRIDGE
D9T Track-Type Tractor RJS00001-UP (MACHINE) POWERED BY C18 Engine »
311-1298
PIN AS-CARTRIDGE
D8T TRACK-TYPE TRACTOR KPZ00001-UP (MACHINE) POWERED BY C15 Engine »
311-1298
PIN AS-CARTRIDGE
D8T TRACK-TYPE TRACTOR J8B00001-UP (MACHINE) POWERED BY C15 Engine »
311-1298
PIN AS-CARTRIDGE
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine »
311-1298
PIN AS-CARTRIDGE
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
1U2472
PIN
844, 844H, 844K, D8L, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
844, 844H, 844K, D8L, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
8E6442
PIN-PIVOT
D8N, D8R
D8N, D8R
9P6912
PIN
D8L, D9N, D9R, D9T
D8L, D9N, D9R, D9T
1029062
PIN AS-G.E.T.
854G, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D9R
854G, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D9R
6Y1204
PIN-G.E.T.
375, 854G, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D9R, D9T
375, 854G, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D9R, D9T
7T9308
PIN AS-CARTRIDGE
D8R, D9R
D8R, D9R
2663152
PIN AS-CARTRIDGE
D8R, D8R II, D8T, D9R, D9T
D8R, D8R II, D8T, D9R, D9T
1036293
PIN
D9N, D9R, D9T
D9N, D9R, D9T
1583653
PIN
D8R, D8R II, D8T
D8R, D8R II, D8T
2374872
PIN-PIVOT
D8R, D8R II, D8T
D8R, D8R II, D8T
1620390
PIN
D8R, D8R II, D8T
D8R, D8R II, D8T
2195735
PIN
D8R, D8T
D8R, D8T
2812051
PIN GP-GRAPPLE
G107B
G107B
3284001
PIN GP-CYLINDER
735B, 740B
735B, 740B
3522570
PIN GP-CYLINDER
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC
6Y8115
PIN GP-CYLINDER
527, D5HTSK II
527, D5HTSK II
2998349
PIN GP
304, 305
304, 305
2224367
PIN GP-EXCAVATOR
5110B
5110B
2582699
PIN GP-LIFT ARM
246C, 256C, 277C, 277C2, 279C, 279C2
246C, 256C, 277C, 277C2, 279C, 279C2
2947805
PIN GP
303
303
2991689
PIN & BUSHING GP-TRACK
330C FM, 330D FM, 345B II, 345C, 345C MH, 551, 552, TK752
330C FM, 330D FM, 345B II, 345C, 345C MH, 551, 552, TK752
1250385
PIN GP
350, 350 L
350, 350 L