PIN 3193653 - Caterpillar

(1) Governor spring. See the Governor Spring Chart.(2) Broken link spring. See the Miscellaneous Spring Chart.(3) Dashpot spring. See the Miscellaneous Spring Chart.(4) Overfueling spring. See the Miscellaneous Spring Chart.(5) Centering spring. See the Miscellaneous Spring Chart.(6) Governor housing assembly.(7) Bumper spring. See the Miscellaneous Spring Chart.(8) Full load stop block. (9) Distance four dowels extend above the surface of governor housing (6) ... 6.0 0.5 mm (.24 .02 in)(10) Distance two dowels extend above the surface of the governor housing ... 3.0 0.5 mm (.12 .02 in) (11) Distance from the surface of block (8) to the end of the dowel ... 62.00 0.75 mm (2.44 .03 in) (12) Tighten the plug to a torque of ... 14 2 N m (10 1 lb ft)(13) Tighten the body to a torque of ... 6.25 1.35 N m (4.6 1.0 lb ft)(14) Tighten the insulator to a torque of ... 3.4 0.5 N m (31 4 lb in)(15) Tighten bolts to a torque of ... 3.5 0.4 N m (31 4 lb in) (16) Throttle shaft assembly. Be sure collar is installed to a length of ... 105.2 0.5 mm (4.14 .02 in) This dimension is required to properly reassemble the governor to insure engine shutdown or prevent internal governor damage from the lever assembly.