PIN AS 3217854 - Caterpillar

Security System Immobilizer Installation Status
This feature enables the ECM to provide the functionality for the installation of a Machine Security System (MSS). Engine Retarder Enable Command (Option)
This parameter is enabled to define the installation status of compression brakes for the engine.Engine Warmup Elevated Idle Feature Enable Status
This feature allows a strategy for elevated idle to be enabled during cold engine operation.Parameter Table
Table 1
System Configuration Parameters
Parameter Available Range or Options Default Required Password
Configuration Group 1
Equipment ID 17 alphanumeric characters Blank None
ECM Identification Parameters
Engine Serial Number 0XX00000 or XXX00000 Blank Factory
ECM Serial Number Hardware Dependent Blank Read Only(1)
ECM Part Number Hardware Dependent Blank Read Only(1)
Software Group Part Number Software Dependent Read Only(1)
Software Group Release Date Software Dependent Read Only(1)
Software Group Description Software Dependent Read Only(1)
System Parameters
FLS Programmed at the Factory Factory
FTS Programmed at the Factory Factory
Rated Power Software Dependent Read Only(1)
Rated Peak Torque Software Dependent Read Only(1)
Top Engine Speed Range Software Dependent Read Only(1)
Test Spec Software Dependent Read Only(1)
Total Tattletale 0 to 65535 0 Read Only(1)
Engine Configuration Parameters
Low System Battery Voltage Elevated Idle Enabled
Disabled Enabled None
Ether Solenoid Configuration Not Installed
Continuous Flow Solenoid Continuous Flow Solenoid Customer
Engine Cooling Fan Map Standard
High Ambient Standard Factory
Security System Immobilizer Installation Status Installed
or
Not Installed Not Installed Factory
Engine Retarder Enable Command (Option) Enabled
Disabled Disabled None
Engine Warmup Elevated Idle Feature Enable Status Enabled
Disabled Disabled None
(1) This parameter can be viewed only. No changes are allowed.Parameter Worksheet
Record the following information before you change any programmable parameter.
Table 2
Engine Parameters
Equipment ID
Engine Serial Number
ECM Serial Number
ECM Part Number
Software Group Part Number
Software Group Release Date
Total Tattletale
FLS
FTS
Low System Battery Voltage Elevated Idle
Ether Solenoid Configuration
Engine Fan Reversing Feature
Engine Cooling Fan Map
Security System Immobilizer Installation Status
Engine Retarder Enable Command
Engine Warmup Elevated Idle Feature Enable Status
Table 3
Information From Engine Information Plate
Engine Serial Number
FLS
FTS Note: Compare the FLS and the FTS from the ECM with the values that are listed on the engine information plate. Use of incorrect parameters could cause damage to the engine. Use of the incorrect parameters may also void the Caterpillar warranty or the emission certification for the engine.