3241155 PIN AS Caterpillar parts
390D, 390D L, 390F L
Rating:
Alternative (cross code) number:
CA3241155
324-1155
3241155
CA3241155
324-1155
3241155
Weight: 198 pounds 89 kg.
EXCAVATOR,
This part in 4 request:
Show.
This information for suppliers only!
2025-01-06
2025-01-06
2022-12-15
2019-08-24
Number on catalog scheme:
9
For full view, you need register
Information:
Illustration 7 g01384432
Use Tooling (B) in order to remove bearing (10) .
Repeat Steps 4 through 8 for the opposite side.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 8 g01384432
Illustration 9 g01384692
Illustration 10 g01384693
Lower the temperature of bearing (10). Be sure to match Dimension (B) and Dimension (C) when you are installing bearing (10). Dimension (B) indicates the angle of the joint on bearing (10). Dimension (B) is 15° 1°. Dimension (C) shows the distance from bearing (10) to the end of the bore. Dimension (C) is 4.000 0.500 mm (0.1575 0.0197 inch).
Illustration 11 g01384714
Illustration 12 g01384715
Lower the temperature of bearing (10A). Be sure to match Dimension (D) and Dimension (E) when you are installing bearing (10A). Dimension (D) indicates the angle of the joint on bearing (10A). Dimension (D) is 15° 1°. Dimension (E) shows the distance from bearing (10A) to the end of the bore. Dimension (E) is 4.000 0.500 mm (0.1575 0.0197 inch).
Illustration 13 g01384430
Install the O-ring seal and cover (9) .
Illustration 14 g01384783
Install gear assembly (8). Be sure that oil passage plug (8A) is facing outward.
Illustration 15 g01384809
Illustration 16 g01384831
Lower the temperature of bearing (7). Be sure to match Dimension (F) and Dimension (G) when you are installing bearing (7) into adapter assembly (6). Dimension (F) indicates the angle of the joint on bearing (7). Dimension (F) is 15° 1°. Dimension (G) shows the distance from bearing (7) to the end of the bore. Dimension (G) is 3.500 0.500 mm (0.1378 0.0197 inch).
Illustration 17 g01383927
Install the O-ring seal and adapter assembly (6). Install bolts (5) .
Repeat Steps 3 through 6 for the opposite side.
Illustration 18 g01384996
Lower the temperature of bearing (4). Install bearing (4) into gear assembly (3). Be sure that each relief (H) in bearing (4) is within 2° of each relief in gear assembly (3) .
Illustration 19 g01383883
Position gear assembly (3) and retainer (2). Install bolts (1) .
Repeat Steps 8 and 9 for the opposite side.End By: Install the flywheel and pump drive gear. Refer to Disassembly and Assembly, "Flywheel - Install".
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C ...
246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 2864C, 287C, 287C2, 289C, 289C2, 297C, 299C, 330D L, 336D L, 336D2 L, 345C, 345C L, 345C MH, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 37...
24M, 3412D, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 651B...
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2384C, 2484C, 2864C, 303, 307C, 307D, 311B, 311C, 312B L, 312C L, 315, 315B L, 315C, 317B LN, 318B, 318C, 320, 320B, 32...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307, 307B, 322, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, ...
345B II, 345C L, 350, 365B, 365B II, 365C, 365C L, 374D L, 375, 375 L, 385B, 385C, 385C L, 390D, 5080, 5110B, 5230, 980G, 988H, 988K, 990, 990 II, 990H, 992G
345C L, 365B, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 390D, 5080, 5090B, 992C, 992G, 994, 994D, 994F
375 L, 385B, 390D, 994, 994D, 994F
330D L, 330D LN, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 797, W345B II, W345C MH
325 L, 328D LCR, 330, 330 L, 330B, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 ...
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
3302718
PIN AS
390D, 390D L, 390F L
390D, 390D L, 390F L
3415236
PIN AS
390D, 390D L
390D, 390D L
3671453
PIN AS
390D, 390D L
390D, 390D L
3302624
PIN AS
390D, 390D L
390D, 390D L
3671461
PIN AS
390D, 390D L, 390F L
390D, 390D L, 390F L
3526865
PIN
374D L, 390D, 390D L
374D L, 390D, 390D L
3671455
PIN AS
390D, 390D L, 390F L
390D, 390D L, 390F L
3480503
PIN AS
390D L, 390F L
390D L, 390F L
3325029
PIN AS
390D, 390D L, 390F L
390D, 390D L, 390F L
3671460
PIN AS
390D, 390D L, 390F L
390D, 390D L, 390F L
3671459
PIN AS
374F L, 390D, 390D L
374F L, 390D, 390D L
3241148
PIN AS
390D, 390D L, 390F L
390D, 390D L, 390F L